User's Manual

Message Causes Solutions
Misfeed: Tray 1
Paper has been jammed in the
tray 1 paper input area.
Remove the jammed paper. See p.368
"Removing Printing Jams".
Misfeed: Tray 2
Paper has been jammed in the
tray 2 paper input area.
Remove the jammed paper. See p.368
"Removing Printing Jams".
Net Communication
Error
Connection with the server was
lost while sending or receiving
data.
Contact the network administrator.
Network is not Ready
A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
No Response
Fax transmission could not be
completed because there was
an error.
Turn off the power, and then turn it back
on.
On Hook or Stop key
The machine has been off-hook
for an extended period of time.
Put down the handset or press the [Clear/
Stop] key.
Out of Paper: X
The indicated tray has run out of
paper.
Load paper to the indicated tray. See p.96
"Loading Paper".
Please Restart
Machine
The machine needs to be
restarted.
Turn off the power, and then turn it back
on.
Remove Paper:
Bypass Tray
The machine failed to proceed
with the print job, because tray
1 or tray 2 was specified as the
input tray but paper was set in
the bypass tray.
Remove paper from the bypass tray.
Replace Toner: Black
Continue printing?
The machine has run out of
toner.
• Press [No] to cancel the job and
replace the print cartridge. See p.
412 "Replacing the Print Cartridge".
• Press [Yes] to finish printing before
replacing the print cartridge.
Error and Status Messages on the Screen
rinmei-mf2_com_user_guide_gb_00059899_eng.xml 407
9
以下に修正します：
■Replace：PrintCartridge
■Themachinehasrunoutoftoner.
■Replacetheprintcartridge.Seep.xx"ReplacingthePrintCartridge".
Draft 2011/08/29