User's Manual

Message Causes Solutions
Replacement
Required:
Fusing Unit
The fusing unit is no longer
usable, and must be replaced.
Contact your sales or service
representative.
Replacement
Required:
Intermediate Transfer
Unit
The intermediate transfer unit is
no longer usable, and must be
replaced.
Contact your sales or service
representative.
Replacement
Required:
Transfer Roller
The transfer roller is no longer
usable, and must be replaced.
Contact your sales or service
representative.
Replacement
Required:
Toner Cartridge
(Black)
The print cartridge is almost
empty.
Prepare a new print cartridge.
RX Comm. Error
A reception error occurred, and
the fax could not be received
correctly.
If possible, contact the sender of the fax
and ask them to resend it.
Scan (NW)
Disconnected
A scanned file could not be sent
because the Ethernet cable was
not connected properly.
Reconnect the Ethernet cable properly,
and then try the operation again.
Scan (USB)
Disconnected
The USB cable was
disconnected while scanning
from a computer.
Reconnect the USB cable properly, and
then try the operation again.
Scanner Carriage
Error
There is an error with the
position of the scanning unit
inside the machine.
Turn off the power, and then turn it back
on. If the problem persists, contact your
sales or service representative.
Scanner Memory
Allocation Failure
The machine's memory reached
capacity while scanning
originals to perform copying.
Turn off the power, and then turn it back
on. If the problem persists, contact your
sales or service representative.
Server Connection
Failed
A scanned file could not be sent
because the destination could
not be reached.
Confirm that the destination is registered
correctly, and then try the operation again.
9. Troubleshooting
408 rinmei-mf2_com_user_guide_gb_00059899_eng.xml
9
以下に修正します
ReplaceSoon：PrintCartridge
Draft 2011/08/29