User's Manual

Message Causes Solutions
USB Disconnected
Press Clear key
The Scan to USB function failed
because the USB flash disk was
removed before the operation
could be completed.
Check that the USB flash disk is securely
inserted in the machine. Do not pull out the
USB flash disk until "Ready" appears on
the display.
USB Memory
Overflow Press Clear
key
The Scan to USB function failed
because there was not enough
memory on the USB flash disk.
Use a USB flash disk with enough memory.
Write Protect Press
Clear key
The Scan to USB function failed
because the machine could not
access the USB flash disk
properly.
Use a USB flash disk that is not password-
or write-protected.
Error and Status Messages on the Screen
rinmei-mf2_com_user_guide_gb_00059899_eng.xml 411
9
Draft 2011/08/29