User's Manual

• If jams or multi-sheet feeds occur after cleaning the friction pad, contact your sales or service
representative.
• If the optional tray 2 is installed, clean its friction pad and paper feed roller in the same way as you
did for tray 1.
Cleaning the Exposure Glass
The following procedure describes how to clean the exposure glass.
1. Lift the ARDF or ADF.
Be careful not to hold the input tray when lifting the ARDF or ADF, for the tray might be damaged.
2. Clean the parts indicated with arrows with a soft damp cloth and then wipe the same
parts with a dry cloth to remove any remaining moisture.
CMF093
Cleaning the ARDF or ADF
The following procedure describes how to clean the ARDF or ADF.
1. Lift the ARDF or ADF.
Be careful not to hold the input tray when lifting the ARDF or ADF, for the tray might be damaged.
10. Maintenance
422 rinmei-mf2_com_user_guide_gb_00059903_eng.xml
10
Draft 2011/08/29