User's Manual

• Tray 1
• Tray 2
• Bypass Tray
• Facsimile
Select a tray to check first when [Auto] is selected for [Select Paper Tray] under fax
feature settings.
• Tray 1
• Tray 2
I/O Timeout
• USB
Specifies how many seconds the machine waits for print data, if the data is interrupted while it
is being sent from the computer via USB. If the machine does not receive any more data within
the time specified here, the machine only prints the data it has received. If printing is frequently
interrupted by data from other ports, increase the timeout period.
Default: [60 sec.]
• 15 sec.
• 60 sec.
• 300 sec.
• Network
Specifies how many seconds the machine waits for print data, if the data is interrupted while it
is being sent from the computer via network. If the machine does not receive any more data
within the time specified here, the machine only prints the data it has received. If printing is
frequently interrupted by data from other ports, increase the timeout period.
Default: [60 sec.]
• 15 sec.
• 60 sec.
• 300 sec.
• Locked Print
Specifies how many seconds the machine holds a new Locked Print file, when the machine
cannot store any more Locked Print files. Within this time, you can print or delete the new
Locked Print file. You can also print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
Default: 60 seconds
• 0 to 300 seconds
• Fixed USB Port
System Settings
rinmei-mf2_com_user_guide_gb_00059818_eng.xml 285
7
削除
Thissettingappears
onlyfortheType2
model.
削除
•UserAuthentication(Copy)
No.19【コピー優先トレイ/自動トレイ選択】
『PROCopyFunctionalSpecv0.0320110624』「2.4.2Auto
TraySelection」では手差しを自動トレイ選択に含まず、優先順は
トレイ1→トレイ2と書いてあります。
『PRO2SystemFunctionalSpecification
V0.1120110630』「3.25.PriorityTray」では、手差しも優先トレ
イとして選択可能となっています。
①コピーの自動トレイ選択は手差しも含み、優先トレイは設定可
能と思いますが正しいですか？
②優先トレイが用紙切れになったとき、残りのトレイ2つの選択
順はトレイ1→トレイ2→手差しで正しいですか？
Draft 2011/08/29