User's Manual
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• Gateway Address
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• IP Address Method
Displays the IP address acquisition method.
• DHCP
• Auto IP
• Manual Config.
• Default IP
IPv6 Configuration
• IPv6
Select whether to enable or disable IPv6.
Default: [Active]
• Active
• Inactive
• DHCP
Sets the machine to receive its IPv6 address from a DHCP server.
Default: [Inactive]
• Active
• Inactive
• IP Address (DHCP)
Displays the IPv6 address obtained from a DHCP server.
• Manual Config. Address
• Manual Config. Address
Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39
characters.
• Prefix Length
Specifies the prefix length, using a value between 0 and 128.
• Gateway Address
Network Settings
rinmei-mf2_com_user_guide_gb_00059821_eng.xml 291
7
削除
WhenDHCPisused,you
cannotspecifytheIPv6
addressmanually.
No.110【手動アドレス、手動ゲートウェイアドレ
ス】(MF2FWv0.24)
FWv0.24の実機で、パネルのネットワーク設定配
下の"ManualConfig.Address"と"Gateway
Address"に入力できる文字について確認です。
ファクス名入力などとは入力できる文字が異なる
ため、文字の入力テーブルも大きく異なるようで
す。仕様書等確認してみましたが、どこに文字テ
ーブルが書いてあるか不明です。
①正しい文字入力仕様をご教示いただけるでし
ょうか。
②文字テーブルを個別にマニュアルに記載する必
要があるでしょうか。
Draft 2011/08/29