User's Manual

• Redial: sending was done by automatic redial.
• Broadcast: sending was done by broadcast.
• LAN-Fax: sending was done by LAN-Fax.
• Forwarding: sending was done by forwarding.
• Memory TX: sending was done by any other method.
Sender/Destination
For a received fax, shows the fax number registered by the sender or an e-mail address if the fax
was received via Internet Fax.
For a fax that was sent, shows the following information according to the transmission method:
• If an external telephone was used: shows the fax number registered by the receiving party.
• If a Quick Dial/Speed Dial was used: shows the name registered for the destination; if a
name was not programmed, shows the destination's fax number.
• If a fax number was input using the control panel number keys: shows the dialed fax number.
• If the fax was sent from the computer (LAN-Fax): shows the dialed fax number.
• If the fax was sent via Internet Fax: shows the destination e-mail address.
No. of Pages
Shows the number of pages a fax contained.
Reading the Scanner Journal
No.
Shows the job number.
Date
Shows the date of a transmission.
Time
Shows the time at which a transmission was completed.
Type
Shows the transmission method.
Destination
Shows the scan destination.
File
Shows the number of files created.
Color
Shows the color mode in which the scanning was performed.
Printing Lists/Reports
rinmei-mf2_com_user_guide_gb_00059824_eng.xml 299
7
Draft 2011/08/29