User's Manual

Admin. Tools Lock

Specifies a four-digit password for accessing the [Address Book], [Network Settings], and [Admin.

Tools] menus.

Do not forget this password.

• On (0000 to 9999)

• Off

IPsec

Selects whether to enable or disable IPsec.

This function appears only when a password is specified under [Admin. Tools Lock].

Default: [Inactive]

• Active

• Inactive

Fax Number Confirmation

Sets the machine to require a fax number to be entered twice when specifying a destination

manually.

When this function is enabled, you cannot use the On Hook Dial function.

This function appears only when a password is specified under [Admin. Tools Lock].

Default: [Off]

• On

• Off

Scan to USB

Selects whether to enable or disable the Scan to USB function.

Note that if you change this setting while a USB flash disk is inserted in the machine, the change

will not take effect immediately. You must remove and re-insert the USB flash disk to make the

change effective.

This function appears only when a password is specified under [Admin. Tools Lock].

Default: [Enable]

• Enable

• Disable

Short Cut Key Settings

Assigns one of the following functions to the [Short Cut] key on the control panel.

Default: [ID Card copy mode]

• ID Card copy mode

• FAX auto print setting

Administrator Settings

rinmei-mf2_com_user_guide_gb_00059831_eng.xml 305

追加

Draft 2011/08/29