User's Manual

6
SP C250DN/SP C252DN weighs around 23.8 kg (52.5 lb). SP C250SF/SP
C252SF weighs around 29.0 kg (64 lb.). When moving the machine, use
the inset grips on both sides, and lift slowly in pairs. The machine will break
or cause injury if dropped.
•
Handling the Machine's Interior
WARNING:
Do not remove any covers or screws other than those explicitly men-
tioned in this manual. Inside this machine are high voltage compo-
nents that are an electric shock hazard and laser components that
could cause blindness. Contact your sales or service representative
if any of the machine's internal components require maintenance,
adjustment, or repair.
Do not attempt to disassemble or modify this machine. Doing so risks
burns and electric shock. Note again that exposure to the laser com-
ponents inside this machine risks blindness.
•
•
CAUTION:
Some of this machine's internal components get very hot. For this reason,
take care when removing misfed paper. Not doing so could result in burns.
•
When removing jammed paper, make sure not to trap or injure your fingers.
•
When loading paper, take care not to trap or injure your fingers.
•
During operation, rollers for transporting the paper and originals revolve.
A safety device has been installed so that the machine can be operated
safely. But take care not to touch the machine during operation. Otherwise,
an injury might occur.
•
Handling the Machine's Supplies
WARNING:
Do not use a vacuum cleaner to remove spilled toner (including used
toner). Absorbed toner may cause a fire or explosion due to electrical
contact flickering inside the vacuum cleaner. However, it is possible to
use a vacuum cleaner that is explosion-proof and dust ignition-proof.
If toner is spilled on the floor, remove the spilled toner slowly using a
wet cloth, so that the toner is not scattered.
•
R
R
R