User's Manual

machine starts to receive faxes. If the message "Receiving..." does not appear, receive the fax
manually. To receive the fax manually, see page 177 "Receiving a fax in FAX/TEL Manual mode".
2. If the external telephone answering device answers, the machine monitors silence on the
line for 30 seconds (silence detection).
• If a fax calling tone or no sound is detected, the machine starts to receive the fax
automatically.
• If a voice is detected, a normal telephone call starts. The external telephone answering device
records messages.
• You can manually receive a fax during silence detection. To receive the fax manually, see
page 177 "Receiving a fax in FAX/TEL Manual mode".
• Silence detection does not terminate for 30 seconds even if the external telephone answering
device goes on-hook, unless you press the [Clear/Stop] key and disconnect the call.
Receiving an Internet Fax
You can set the machine to periodically check for e-mails (Internet Faxes) and receive them
automatically, or you can manually check and receive them.
• Specify the e-mail address of this machine for receiving Internet Faxes in User Account under POP3
settings of Web Image Monitor.
• This machine may not be able to receive e-mails in HTML format.
• This function is available for the Type 2 model only.
Automatic reception
When [Automatic POP] under Internet Fax settings of Web Image Monitor is enabled, the machine
periodically connects to the POP3 server, as specified in [POP Interval (minutes)], to check for new
e-mails. The machine will download them if there are any.
Manual reception
When [Automatic POP] is disabled, use the control panel to manually connect to the POP3 server
and check for new e-mails.
Receiving a Fax
179