User's Manual

In copier mode In scanner mode In fax mode

Right 3 mm (0.1 inches) 0 mm (0 inches) 1 mm (0.05 inches)

(Letter, Legal)

0 mm (0 inches) (other

sizes)

Left 3 mm (0.1 inches) 0 mm (0 inches) 1 mm (0.05 inches)

(Letter, Legal)

0 mm (0 inches) (other

sizes)

Bottom 4 mm (0.2 inches) 2 mm (0.08 inches) 2 mm (0.08 inches)

Placing Originals

This section describes the procedure for placing originals on the exposure glass and in the ADF.

• Do not place originals before any correction fluid and toner has completely dried. Doing so may

make marks on the exposure glass that will appear on copies.

• The original in the ADF takes precedence over the original on the exposure glass if you place

originals both in the ADF and on the exposure glass.

Placing Originals on the exposure glass

1. Lift the ADF.

Be careful not to hold the ADF input paper tray when lifting the ADF. Doing so may damage the

tray.

2. Loading Paper