Operation Manual

When there is a problem with the print settings
Message Cause Solution
"Booklet/Half Fold Error" The job was canceled because
you specified invalid settings for
saddle stitching or half fold.
Check the settings for saddle
stitching or half fold.
"Classification Code is
incorrect."
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
Enter the correct classification
code.
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
"Duplex Cancelled" Duplex printing was canceled. Change the setting for "Apply
Duplex" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see
"Tray Paper Settings",
Connecting the Machine/
System Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
"Exceeded the maximum
number of multi-sheet fold (Half
Fold)."
The maximum number of multi-
sheet folds (Half Fold) was
exceeded.
For details about the maximum
number of multi-sheet folds (Half
Fold), see "Fold", Print.
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
Messages Displayed When You Use the Printer Function
181