Operation Manual

Direction of paper

grain

Tray 1 Trays 2 and 3 Bypass tray

You can load paper in the orientation into tray 1 only if the A3/11 × 17 tray unit is installed.

• To feed sheets that are smaller than A4 sideways ( ), keep the height of the stacked sheets less

than 20 mm.

The upper edge of the square hole in the side fence on the far side indicates the upper limit.

DPZ042

• When copying or printing is performed onto thick paper on Type1/2, the copy/print speed is

slower than usual.

• Select [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], or [Thick Paper 4] as the paper thickness in

[Tray Paper Settings].

• Even if thick paper is loaded as described above, normal operations and print quality might still not

be possible, depending on the paper type.

• Prints might have prominent vertical creases.

• Prints might be noticeably curled. Flatten out prints if they are creased or curled.