Operation Manual

When there is a problem with the print settings
Message Cause Solution
"Classification Code is
incorrect."
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
Enter the correct classification
code.
"Classification Code is
incorrect."
The classification code is not
supported with the printer
driver.
Select [Optional] for
classification code. For details
about how to specify
classification code settings, see
"Configuring Classification
Codes", Print.
"Duplex Cancelled" Duplex printing was canceled. Change the setting for "Apply
Duplex" in [Tray Paper Settings]
to enable duplex printing for the
paper tray. For details about
setting "Apply Duplex", see
"Tray Paper Settings",
Connecting the Machine/
System Settings.
"Exceeded Max. Pages
(Collate)"
The number of pages exceeds
the maximum number of sheets
that you can use Collate with.
Reduce the number of pages to
print.
"Output Tray Changed" The output tray was changed
because the paper size of the
specified output tray is limited.
Specify the proper output tray.
"Print Overrun" Images were discarded while
printing.
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver
Help.
Messages Displayed When You Use the Printer Function
171