Operation Manual

Transmitting while Checking Connection to

Destination (Immediate Transmission)

Using Immediate Transmission, you can send documents while checking the connection to the

destination.

You can specify fax or IP-Fax destinations.

If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the

transmission mode is automatically switched to Memory Transmission.

• It is recommended that you call the receivers and confirm with them when sending important

documents.

1. Press [Home] ( ) at the bottom of the screen in the center.

2. Flick the screen to the left, and then press the [Fax] icon on Home screen 4.

3. Make sure "Ready" appears on the screen.

4. Press [Immed. TX].

5. Place the original into the ADF.

6. Select the scan settings you require.

7. Specify a destination.

If you make a mistake, press [Clear], and then enter again.

8. Press [Start].

4. Fax