Operation Manual

• The maximum number of sheets you can load at the same time depends on paper type. Do not

stack paper over the limit mark. For the maximum number of sheets you can load, see page 141

"Recommended Paper Sizes and Types".

1. Open the bypass tray.

DBG021

2. Load the paper face down until you hear the beep.

3. Align the paper guides to the paper size.

If the guides are not flush against the paper, images might be skewed or paper misfeeds might

occur.

DBG022

• Certain types of paper might not be detected properly when placed on the bypass tray. If this

happens, remove the paper and place it on the bypass tray again.

• Pull the extender out when loading A4 , 8

× 11 or larger size paper in the bypass tray.

• When loading thick paper, thin paper, or OHP transparencies, specify the paper size and the

paper type.

• Letterhead paper must be loaded in a specific orientation. For details, see page 138 "Loading

Orientation-fixed Paper or Two-sided Paper".

Loading Paper

133