Operation Manual
Paper Thickness
*1
Paper weight
Thick Paper 1 106–130 g/m
2
(28–35 lb. Bond)
Thick Paper 2 131–163 g/m
2
(35 lb. Bond–90 lb. Index)
Thick Paper 3 164–220 g/m
2
(90 lb. Index–80 lb. Cover)
Thick Paper 4 221–256 g/m
2
(80 lb. Cover–140 lb. Index)
*1
Print quality will decrease if the paper you are using is close to the minimum or maximum weight.
Change the paper weight setting to thinner or thicker.
*2
Depending on the type of thin paper, the edges may crease or the paper may be misfed.
• Certain types of paper, such as OHP transparencies, may produce noise when delivered. This
noise does not indicate a problem and print quality is unaffected.
• The paper capacity described in the tables above is an example. Actual paper capacity might be
lower, depending on the paper type.
• When loading paper, make sure the stack height does not exceed the limit mark of the paper tray.
• If multiple sheet feeding occurs, fan sheets thoroughly or load sheets one by one from the bypass
tray.
• Flatten out curled sheets before loading them.
• Depending on the paper sizes and types, the copy/print speed may be slower than usual.
• When loading thick paper of 106–256 g/m
2
(28 lb. Bond–140 lb. Index), see page 146 "Thick
paper".
• When loading envelopes, see page 147 "Envelopes".
• When copying or printing onto letterhead paper, the paper placing orientation is different
depending on which function you are using. For details, see page 138 "Loading Orientation-fixed
Paper or Two-sided Paper".
• If you load paper of the same size and same type in two or more trays, the machine automatically
feeds from one of the trays in which [Yes] is selected for [Apply Auto Paper Select] when the first
tray in use runs out of paper. This function is called Auto Tray Switching. This saves interrupting a
copy run to replenish paper when making a large number of copies. You can specify the paper
type of the paper trays under [Paper Type]. For details, see "Tray Paper Settings", Connecting the
Machine/ System Settings. For the setting procedure of the Auto Tray Switching function, see
"General Features", Copy/ Document Server.
• When loading label paper:
• We recommend that you use specified label paper.
• It is recommended to place one sheet at a time.
Recommended Paper
145