Operation Manual

Direction of paper grain Paper trays Bypass tray

• Select [Thick Paper 1], [Thick Paper 2], [Thick Paper 3], or [Thick Paper 4] as the paper thickness in

[Tray Paper Settings].

• Even if thick paper is loaded as described above, normal operations and print quality might still not

be possible, depending on the paper type.

• Prints might have prominent vertical creases.

• Prints might be noticeably curled. Flatten out prints if they are creased or curled.

Envelopes

This section gives you various details about and recommendations concerning envelopes.

• Do not use window envelopes.

• Misfeeds might occur depending on the length and shape of the flaps.

• Before loading envelopes, press down on them to remove any air from inside, flatten out all four

edges. If they are bent or curled, flatten their leading edges (the edge going into the machine) by

running a pencil or ruler across them.

In copier mode

The way to load envelopes varies depending on the orientation of the envelopes. When copying

onto envelopes, load them according to the applicable orientation shown below: