Operation Manual

Message Causes Solutions
"HDD Full" The hard disk became full
while you were printing a
Sample Print, Locked Print,
Hold Print, or Stored Print
file.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file.
"HDD is full. (Auto)" The hard disk became full
while you were using the
error job store function to
store Normal Print jobs as
Hold Print files.
Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
When there is a problem with a parameter
Message Causes Solutions
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
When the user lacks privileges to perform an operation
Message Causes Solutions
"No response from the
server. Authentication has
failed."
A timeout occurred while
connection to the server was
being established for LDAP
authentication or Windows
Authentication.
Check the status of the server.
"Printing privileges have not
been set for this document."
You have no privileges to
print the PDF document you
tried to print.
Contact the owner of the document.
"You do not have a privilege
to use this function. This job
has been cancelled."
The entered login user name
or login password is not
correct.
Check that the user name and
password are correct.
"You do not have a privilege
to use this function. This job
has been cancelled."
The logged in user is not
allowed to use the selected
function.
For details about how to set
permissions, see Security Guide.
10. Troubleshooting
186