Operation Manual

2. Press the [Print/Scan(Memory Storage Device)] icon.
3. Press [Scan to Media].
4. Insert a memory storage device in the media slot.
For details about how to insert a memory storage device, see "Inserting/Removing a Memory
Storage Device", Getting Started.
5. Press [USB] or [SD Card], depending on the type of the storage device that you are
using.
6. Specify the location to save the scanned data.
7. If necessary, press [Scan Setting] to change the settings such as the file type or scan
resolution.
8. To see the scanned image before saving it to a file, press [Preview].
9. Place the originals.
If scanning does not start automatically, press [Start].
10. Press [Finish Scan] after scanning of the original has been completed.
If there are more originals to be scanned, place the next original, and then press [Scan Next
Original].
11. When the preview screen appears, check the scanned image, and then press [Save].
Using the Print/Scan(Memory Storage Device) Function
111