Operation Manual

7. Specify a user name, and then press [OK].
The user names shown are names that were registered in the Address Book. To specify a name not
shown in the screen, press [Manual Entry], and then enter a user name.
8. Press [File Name].
9. Enter a file name, and then press [OK].
10. Press [Password].
11. Enter a password with the number keys, and then press [OK].
You can use four to eight digits for the password.
12. For double-check, enter the password again, and then press [OK].
13. Place the original.
The original feeds into the machine automatically.
If [Press Start Key] is selected for [Feed Start Method], scanning starts when you press [Start].
The original is scanned.
14. Press [Finish Scanning] after all documents are scanned.
The document is saved in the Document Server.
6. Document Server
132