Operation Manual

• For paper types and sizes that can be loaded in the paper input locations and paper bypass
location, see page 159 "Recommended Paper Sizes and Types".
• When copying onto custom size paper, specify the paper size. When copying onto custom size cut
paper using the copier function, see "Copying onto Custom Size Paper from the Paper Bypass
Location", Copy/ Document Server. When printing onto custom size paper roll using the printer
function, see page 151 "Specifying a custom size roll of paper using the control panel". When
printing onto custom size cut paper, see page 157 "Specifying a custom size of cut paper using
the control panel".
Loading Paper Roll into the Paper Input Location
This section explains how to load a paper roll into the paper input location.
• Bring the paper holder flush against the paper edge to fasten the paper.
• Insert the paper holder flange securely.
• Make sure not to load a paper roll in the opposite direction.
• Before loading the paper roll into the paper input location, remove any paper that is in the paper
bypass location.
• When the paper roll is in one of the following conditions, you cannot use it. Cut off the edge of the
paper with scissors before loading it.
• The leading edge is damaged
DHJ346
• Adhesive tape, glue or paste is sticking to it
8. Adding Paper and Ink
138