Operation Manual

DNE022
9. Close the front cover.
DNE023
10. Make sure that the [Copy] or [Printer (Classic)] screen is displayed.
11. Follow the on-screen instructions to specify the paper type and thickness of the paper.
Press [Matches] if the paper type and thickness of paper you loaded are the same as those
displayed on the screen.
If the paper type and thickness are different from those displayed, press [Does not Match]. Select
the proper items according to the paper type and thickness you want to use, and then press [OK].
12. Make sure that [ ] appears at the paper bypass location on the screen.
• Do not operate the machine while "Please wait". is displayed when the machine is turned on.
• Press the rewind button to rewind the roll of paper. Rewinding it manually may cause paper jams.
• When [Film (Matte)] is specified for Paper Type or when Prevent Paper Abrasion is specified, press
[Exit] on the screen after closing the front cover. You can change the Prevent Paper Abrasion setting
in System Settings if necessary. However, if you specify [Film (Matte)] for Paper Type, the Prevent
Paper Abrasion setting is automatically selected, and you cannot change it. For details about
Prevent Paper Abrasion, see "System Settings", Connecting the Machine/ System Settings.
• Do not print on both sides of the paper.
• Do not use paper already printed on.
• Do not insert multiple sheets at one time. Doing so can result in jams and poor quality prints.
Loading Paper
155