Operation Manual

• If, after replacing the print cartridge, add ink messages continue to appear, turn off the machine's
power, and then turn it back on again.
• Print cartridges should be used up before their expiration date, ideally within six months of being
removed from their packaging.
• Open the print cartridge pack immediately before replacement.
• Do not shake the print cartridge. Doing so can result in leakage.
• Do not disassemble the print cartridge.
• Do not turn off the power during the replacement procedure and do not disconnect the power plug
from the wall outlet.
• Once it is inserted, do not remove the print cartridge unless necessary.
• Do not remove or tamper with the print cartridges during printing. This will cause printing to stop.
• Color ink may be consumed even though color printing is not performed.
• When the machine has run out of ink, the indicator on the display lights. Note that even if there is
no ink left, you can still send scanned documents.
Handling Ink
• Keep ink and ink containers out of reach of children.
Use only manufacturer-recommended print cartridges. Recommended cartridges have been safety-
evaluated and will not damage the machine.
• For details about how to add print cartridges, see page 175 "Adding Ink".
Storing Ink
• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if
necessary.
• If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor
immediately.
Adding Ink
177