Operation Manual

Message Cause Solution
"Self checking..." • The machine is
performing image
adjustment operations.
• The machine is
cleaning its print-head.
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
resume operation.
When There Is a Problem Scanning or Storing Originals
Message Cause Solution
"Cannot detect original
size."
"Select scan size."
The machine failed to detect
the size of the original.
• Place the original correctly.
• Specify the scan size, and then
place the originals again.
"Cannot display preview of
this page."
The size of the image you
want to preview is larger
than 914.4 × 1219.2 mm
(36 × 48 inches).
Images larger than 914.4 × 1219.2
mm (36 × 48 inches) cannot be
previewed. Specify 914.4 × 1219.2
mm (36 × 48 inches) or a smaller
image, or scan again at 914.4 ×
1219.2 mm (36 × 48 inches) or
smaller.
"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."
The maximum number of
pages per file has been
exceeded.
Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan.
"Original is being scanned
by another function. Please
wait."
Another function of the
machine is being used.
Cancel the job in progress. Press [Exit],
and then press [Stop]. Follow the
instructions in the message that
appears and exit the function that is
running.
When Other Messages Appear
221