Operation Manual

A
B
C
D
E
F
G
-8
-7 -5 -4-6 -1-3 -2 0 +1 +3 +8+4+2 +7+5 +6
H
I
J
+1 +2 +3
DNK010
8. Press [Adjustment].
9. Enter the adjustment value with [ ] [ ], and then press [OK].
10. Press [Exit].
To check the results of adjustment, print the test pattern again.
11. Press [User Tools] ( ) on the top right of the screen.
12. Press [Home] ( ) at the bottom of the screen in the center.
• For details about Prevent Paper Abrasion mode, see page 227 "Checking Whether the Print-heads
Scratch the Paper".
Adjust Print Position
This function prints the test sheet for adjusting the print start position of paper on a paper input location
basis.
To check the print results of the test sheet, proceed to Step 8.
• Printing the test sheet consumes ink. Perform this function only when necessary.
9. Troubleshooting
236