Operation Manual

CQA006
• Adjust so that the margins are 5 mm (0.20 inches). For example, if the center of the horizontal
line is printed 4 mm (0.16 inches) from the top edge of the sheet, the adjustment value of "Top
Margin" is "1.0 mm (0.04 inches)".
• In the same manner, if the center of the vertical line is printed 8 mm (0.32 inches) from the left
edge of the sheet, the adjustment value of "Left Margin" is "-3.0 mm (-0.12 inches)".
9. Select the paper input location of the print position you selected to adjust, and then press
[Adjustment].
10. Enter the adjustment values, and then press [OK].
• Press [ ] and [ ] to enter the adjustment value of "Top Margin".
• Press [ ] and [ ] to enter the adjustment value of "Left Margin".
11. Press [Exit].
To check the results of adjustment, print the test sheet again.
12. Press [User Tools] ( ) on the top right of the screen.
13. Press [Home] ( ) at the bottom of the screen in the center.
• For details about Prevent Paper Abrasion mode, see page 227 "Checking Whether the Print-heads
Scratch the Paper".
9. Troubleshooting
238