Operation Manual

Adjust Paper Feed
This function prints the test sheet for adjusting paper feed if misalignment of horizontals or image surface
irregularities occurs.
To check the print results of the test sheet, proceed to Step 8.
• Printing the test sheet consumes ink. Perform this function only when necessary.
• Adjustment results vary depending on the Prevent Paper Abrasion mode's status. If you perform an
adjustment while Prevent Paper Abrasion mode is enabled and do not want to print using this
mode, cancel Prevent Paper Abrasion mode, and then perform the adjustment again.
• Perform no other operations while the test sheet is printing.
• An error will occur and test sheets will not print if:
• There is a misfeed.
• One of the machine's covers is open.
• The machine is performing maintenance operations.
• The machine has run out of ink.
• The machine has run out of paper.
1. Press [Home] (
) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Machine Features].
4. Press [Maintenance].
5. Press [Adjust Paper Feed].
6. Select the paper input location of the paper feed you want to adjust, and then press [Print
Test Sheet].
7. Press [Start Printing].
8. Check the optimal adjustment value based on the print results of the test sheet.
• The optimal adjustment value is the number next to the square pattern that has the faintest
color closest to gray and aligned horizontals on both sides. If the value on the left of the
pattern is "+2", the adjustment value is "+2".
Adjusting the Print Quality
239