Operation Manual

9. Select the paper input location of the paper feed you selected to adjust, and then press
[Adjustment].
10. Enter the adjustment value with [ ] [ ], and then press [OK].
11. Press [Exit].
To check the results of adjustment, print the test sheet again.
12. Press [User Tools] ( ) on the top right of the screen.
13. Press [Home] ( ) at the bottom of the screen in the center.
• For details about Prevent Paper Abrasion mode, see page 227 "Checking Whether the Print-heads
Scratch the Paper".
Cut Paper
This function cuts a paper roll at the specified length from the paper's leading edge.
• Perform no other operations while a paper roll is being cut.
• An error will occur and cutting paper will not be possible if:
• One of the machine's covers is open.
• The machine is performing maintenance operations.
• The machine has run out of paper.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Machine Features].
4. Press [Maintenance].
5. Press [Cut Paper].
Adjusting the Print Quality
241