Operation Manual

This section explains how to register functions to a program by using each application.
Standard Applications/Quick Applications
1. Edit the settings so all functions you want to register to a program are selected on the
[Copy], [Scanner], or [Quick Scanner] screen.
2. Press [Menu] ( ) at the bottom of the screen in the center.
3. Press [Reg. Current Setting to Program].
4. Press the program number you want to register.
5. Enter the program name.
6. Select the icon for the program.
7. Press [Prev. Screen].
When using the quick application, press [Previous Scr.].
8. Press [OK].
9. Press [Place].
Even if you select [Do not Place], you can add shortcuts to the program to the [Home] screen
after the program registration is complete.
10. Press [Exit].
Classic Applications
1. Edit the settings so all functions you want to register to a program are selected on the
[Copier (Classic)], [Document Server], or [Scanner (Classic)] screen.
When using the Document Server, edit the settings on the initial document print screen.
2. Press [Recall/Program/Change Program] on the bottom left of the screen.
3. Press [Program].
4. Press the program number you want to register.
5. Enter the program name.
6. Press [OK].
7. Press [Exit].
Registering Functions in a Program
51