Operation Manual

• The number of characters you can enter for a program name varies depending on the functions as

follows:

• Standard Applications

• Copy: 40 characters

• Scanner: 40 characters

• Classic Applications

• Copier (Classic): 34 characters

• Document Server: 34 characters

• Scanner (Classic): 34 characters

• Quick Applications

• Quick Scanner: 40 characters

• When a specified program is registered as the default, its values become the default settings, which

are displayed without recalling the program, when modes are cleared or reset, and after the

machine is turned on. See "Changing the Default Functions of the Initial Screen", Convenient

Functions.

• If the paper input location you specified in a program runs out of paper and an another paper

input location is configured with the same size of paper, the paper input location will automatically

switch to the other.

• Destinations can be registered to a program of the scanner mode only when [Include Destinations]

is selected for [Program Setting for Destinations] in [Scanner Features]. For details about the setting,

see "General Settings", Scan.

• Folder destinations that have protection codes cannot be registered to a program of the scanner

mode.

• Programs are not deleted by turning the power off or by pressing [Reset] unless the program is

deleted or overwritten.

• When you are using the Classic Applications, program numbers with

next to them indicate that

the programs have been registered.

• Programs can be registered to the [Home] screen, and can be recalled easily. For details, see

page 41 "Adding Icons to the [Home] Screen". Shortcuts to programs stored in Document Server

mode cannot be registered to the [Home] screen.

2. Getting Started