Operation Manual

• If you specify [Display Automatically] for [Paper Settings Screen for Bypass], you can display the

[Bypass Paper] screen by pressing [ ] instead of pressing [ ]. For details, see "General

Features", Copy/ Document Server.

• If the paper bypass location is not automatically selected, press [

Copying onto Regular Size Paper from the Paper Bypass Location

When Using the Copy Application

About how to use the application's screen, see page 43 "[Copy] Screen".

When Using the Copier (Classic) Application

1. Open the front cover, and then pull up the paper holding lever.

2. Insert the paper copy side up into the paper bypass location.

3. Lower the paper holding lever, and then close the front cover.

4. Specify the type of the paper as necessary.

5. Make sure that the paper bypass location ( ) is selected, and then press [ ].

6. Press [Paper Size].

7. Select the paper size.

8. Press [OK] twice.

3. Copy