Operation Manual

4. Print

This chapter describes frequently used printer functions and operations. For information not included in

this chapter, see Print available on our website.

Installing the Printer Driver for a Network

Connection

This section describes the installation procedure of the printer drivers for network connection.

• Manage Printers permission is required to install the driver. Log on as an Administrators group

member.

Installing the Printer Driver for the Selected Port

Describes the driver installation procedure for each printer port. See the installation procedure for the

printer port you are using.

Port Type Reference

Standard TCP/IP port page 89 "Using the Standard TCP/IP port"

IPP port page 90 "Using the IPP port"

LPR port page 91 "Using the LPR port"

Using the Standard TCP/IP port

1. Click [PostScript 3 Printer Driver] on the installer screen.

2. The software license agreement appears in the [License Agreement] dialog box. After

reading the agreement, click [I accept the agreement.], and then click [Next >].

3. Select a printer driver you want to use, and then click [Next >].

4. Select [Specify a new port], and then click [Next >].

5. Select [Standard TCP/IP Port], and then click [Next >].

6. Click [Next].

7. Enter the machine name or IP address, and then click [Next].

When the device type selection appears, select "RICOH Network Printer C model".

8. Click [Finish].