RICOH PJ WU6181N/WX6181N/X6181N User’s Manual Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Important Information in this manual before using the machine.
• Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc. registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.
Important Information Safety Cautions Precautions Please read this manual carefully before using your Ricoh projector and keep the manual handy for future reference. CAUTION CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Information The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment.
Important Information Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings. Installation • Do not place the projector in the following conditions: - on an unstable cart, stand, or table. - near water, baths, or damp rooms. - in direct sunlight, near heaters, or heat radiating appliances. - in a dusty, smoky or steamy environment. - on a sheet of paper or cloth, rugs or carpets.
Important Information Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.
Important Information CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [MODE] → [HIGH].
Important Information A Lamp Characteristic The projector has a high-pressure mercury lamp as a light source. A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of its lower brightness. CAUTION: • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.
Important Information Safety Labels of This Machine 1 Do not look into the lens while the projector is on. Serious damage to your eyes could result. Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap due to the heat emitted from the light output. Do not place any objects, which are easily affected by heat, in front of the projector lens. Doing so could lead to the object melting from the heat that is emitted from the light output.
Important Information Health precautions to users viewing 3D images Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your 3D eyeglasses or your 3D compatible content such as Blu-ray Discs, video games, computer’s video files and the like. To avoid any adverse symptoms, heed the following: • Do not use 3D eyeglasses for viewing any material other than 3D images. • Allow a distance of 2 m/7 feet or greater between the screen and a user.
Important Information Clearance for Installing the Projector Allow ample clearance between the projector and its surroundings as shown below. The high temperature exhaust coming out of the device may be sucked into the device again. Avoid installing the projector in a place where air movement from the HVAC is directed at the projector. Heated air from the HVAC can be taken in by the projector's intake vent.
Table of Contents Important Information.................................................................................................................................. i 1. Introduction.......................................................................................................................................................... 1 ❶ What’s in the Box?................................................................................................................1 ❷ Introduction to the Projector...
Table of Contents ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE]....31 Checking Energy-Saving Effect [CARBON METER]....................................................32 ❺ Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE].......................33 6 Preventing the Unauthorized Use of the Projector [SECURITY].........................................36 7 Projecting 3D videos..........................................................................................
Table of Contents [INSTALLATION]........................................................................................................109 [CONTROL].................................................................................................................112 [NETWORK SETTINGS]..............................................................................................120 [SOURCE OPTIONS]..................................................................................................
Table of Contents Download service........................................................................................................181 Operating Environment...............................................................................................181 ❷ Installing Software Program..............................................................................................183 Installation for Windows software...............................................................................
1. Introduction ❶ What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Projector Dust cap for lens * The projector is shipped without a lens. For the types of lens and throw distances, see page 231. Power cord Remote control AA alkaline batteries (x2) Lens theft prevention screw This screw makes it difficult to remove the lens mounted on the projector.
1. Introduction ❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 500 inches across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, Blu-ray player, or document camera.
1. Introduction • Simultaneous display of 2 images (PIP/PICTURE BY PICTURE) Two images can be projected simultaneously with a single projector. There are two types of layouts for the two images: “picture-in-picture” in which a sub-picture is displayed on the main picture, and “picture-by-picture” in which the main and sub pictures are displayed next to each other.
1. Introduction Maintenance • Maximum lamp replacement time of 4000 hours and no need to clean the filters When used in the eco mode, the lamp replacement time* is extended to a maximum of 4000 hours. * This time is not guaranteed. Furthermore, this projector uses large 2-layer filters. When these filters are replaced with new ones when changing the lamp, there is no need for regular filter cleaning. * Actual menus may be different from the menu images in this user’s manual.
1. Introduction About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it. Notation by Resolution These indicate the descriptions of the model groups according to the resolution of the liquid crystal panels.
1. Introduction About the Projector’s [NETWORK SETTINGS] “NETWORK SETTINGS” need to be carried out when connecting this projector to a wired or wireless LAN. The following two types of [NETWORK SETTINGS] 1 and 2 can be used. Use the [NETWORK SETTINGS] 1 and 2 for different purposes depending on the software and function described in the table below. 1. “NETWORK SETTINGS” under [SETUP] in the on-screen menu (→ Page 120) Or “NETWORK SETTINGS” in the HTTP server (→ Page 46) 2.
1. Introduction ❸ Part Names of the Projector Front/Top The lens is sold separately. The description below is for when the Standard Lens Type1 lens is mounted. Lens Shift Dial (vertical/horizontal) (→ page 21) Securing lever cover (→ page 164) Indicator Section (→ page 9) Zoom Lever/Zoom Ring (→ page 25) Remote Sensor (→ page 13) Remote Sensor (located on the front and the rear) (→ page 13) Exhaust vent Heated air is exhausted from here.
1. Introduction Rear Remote Sensor (located on the front and the rear) (→ page 13) Terminals (→ page 10) Exhaust vent Heated air is exhausted from here. W W IRE LE SS IRE LE SS USB (LAN) Port This is located inside the projector. A wireless LAN unit sold separately can be attached. (→ page 167) Intake vent / Filter Cover (→ page 171, 178) AC IN Terminal Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet.
9. Using the Viewer Controls/Indicator Panel 2 1. 3 4 5 8 (POWER) Button (→ page 16, 27) 2. POWER Indicator (→ page 15, 16, 27, 245) 3. STATUS Indicator (→ page 245) 4. LAMP Indicator (→ page 176, 246) 5. TEMP. Indicator (→ page 246) 6. INPUT Button (→ page 18) 7. AUTO ADJ. Button (→ page 26) 8. Geometric. Button (→ page 33) 9. MENU Button (→ page 75) 10. ▲▼◀▶ / Volume Buttons ◀▶ (→ page 26, 75) 11. ENTER Button (→ page 75) 12.
1. Introduction Terminals 10 12 11 1 2 3 4 8 9 7 13 14 1. HDMI 1 IN Connector (Type A) (→ page 156, 158, 162) 5 6 15 16 15. PC CONTROL Port (D-Sub 9 Pin) (→ page 244) Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 250. 2. HDMI 2 IN Connector (Type A) (→ page 156, 158, 162) 3. DisplayPort IN Connector (→ page 156) 16.
1. Introduction ❹ Part Names of the Remote Control 1 3 5 4 8 9 12 13 16 17 19 22 23 25 Eternet 27 2 6 7 11 10 15 14 18 21 20 24 26 28 8. TEST Button (→ page 83) 29. ▲▼◀▶ Button (→ page 75) 9. Edge Blend. Button (→ page 69, 104) 30. ENTER Button (→ page 75) 10. Multi. Button (→ page 105) 31. L-CLICK Button* (not available on this series of projectors) 32. R-CLICK Button* (not available on this series of projectors) 33. VOL./FOCUS (+)(−) Button (→ page 26) 11. Geometric. Button (→ page 33, 100) 12.
1. Introduction Battery Installation 1. Press the catch and remove the 2. Install new ones (AA). Ensure 3. Slip the cover back over the batteries until it battery cover. that you have the batteries’ snaps into place. polarity (+/−) aligned correctly. NOTE: Do not mix different types of batteries or new and old batteries. Remove the old battery and put the new battery. 1 2 1 Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately.
1. Introduction Operating Range for Wireless Remote Control 40 m/1575 inch 40 20 m/787 inch m/ 157 5 in ch 20 m/787 inch 20 m/787 inch Remote sensor on projector cabinet 20 m/787 inch 15 m/591 inch Remote control 15 m/591 inch 15 m/591 inch 15 m/591 inch 40 m/1575 inch 40 m/1575 inch • • The infrared signal operates by line-of-sight up to a distance of above meters and within a 60-degree angle of the remote sensor on the projector cabinet.
2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.
2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see “(2) Making Connections” on page 155.
2. Projecting an Image (Basic Operation) ❸ Turning on the Projector 1. Remove the lens cap. 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will light up in blue from red and then start blinking. After that, the image will be projected onto the screen. Eternet TIP: • When the message “PROJECTOR IS LOCKED! ENTER YOUR PASSWORD.” is displayed, it means that the [SECURITY] feature is turned on.
2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 29 menu languages. To select a menu language, follow these steps: 1. Use the ▲, ▼, ◀ or ▶ button to select one of the 29 languages from the menu. 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu operation.
2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button for 1 second or longer. The projector will search for the available input source and display it. The input source will change as follows: Automatically checks for any input signal in the order HDMI 1 → HDMI 2 → Display Port → BNC → BNC(CV) → BNC(Y/C) → COMPUTER → USB-A.
2. Projecting an Image (Basic Operation) Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ▼ button or the ENTER button to select [BASIC]. 3. Press the ▶ button to select [SOURCE OPTIONS]. 4. Press the ▼ button four times to select [DEFAULT INPUT SELECT] and press the ENTER button.
2. Projecting an Image (Basic Operation) ❺ Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot lever, the zoom lever/zoom ring and the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity.
2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them. Lens shift dial (Horizontal) Leftward Rightward Downward Upward Lens shift dial (Vertical) • Turn the lens shift dials clockwise or counterclockwise.
2. Projecting an Image (Basic Operation) TIP: • The diagram below shows the lens shift adjustment range (projection format: desk/front) of the WUXGA type (excluding the lens unit Replacement Lens Type8). Use the tilt foot if you wish to raise the projection position beyond this. (→ page 25) • Refer to Page 235 for the lens shift adjustment range of the WXGA type/XGA type and for ceiling hanging/front projection.
2. Projecting an Image (Basic Operation) Applicable lens: Replacement Lens Type8 The Replacement Lens Type8 lens unit aligns the peripheral focus around the optical axis. Peripheral focus ring Focus Ring Zoom Lever 1. Turn the focus ring left and right to align the focus around the optical axis. * The diagram shows an example when the lens shift is moved to the top. The top of the screen is adjusted. When the lens is in the center, the center of the screen is adjusted. Focus Ring Optical axis 2.
2. Projecting an Image (Basic Operation) Applicable lens: Replacemnet Lens Type1 With the Replacement Lens Type1 lens, adjust the focus and picture distortion. Preparations: Turn the lens shift dials (vertical and horizontal) on the projector to return the lens shift to the center. Approximate lens center position (explained here for the desktop front projection mode) Horizontal dial ������������First turn the dial to the left edge, then turn it further so that the knob is horizontal.
2. Projecting an Image (Basic Operation) Zoom Turn the zoom lever or zoom ring clockwise and counterclockwise. • The separately sold Replacement Lens Type1 lens does not have a zoom ring. Zoom ring Adjusting the Tilt Feet 1. Turn the left and right tilt feet to adjust. The tilt feet lengthen and shorten when turned. The height of the projected image is adjusted by turning the left and right tilt feet. If the projected image is tilted, turn one of the tilt feet to adjust the image so that it is level.
2. Projecting an Image (Basic Operation) ❻ Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust When projecting a signal from the computer video input terminal, BNC video input terminal (anlaog RGB), HDMI 1 input terminal, HDMI 2 input terminal, DisplayPort input terminal, adjust the picture quality with a single touch of the button if the edges of the screen are cut off or if the projection quality is bad. Press the AUTO ADJ. button to optimize a computer image automatically.
2. Projecting an Image (Basic Operation) ❽ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAVINGS- SESSION 0.000[g-CO2]] message will appear. Eternet 2. Secondly, press the ENTER button or press the or the STANDBY button again. (POWER) The lamp will go off and the power supply will be cut.
2. Projecting an Image (Basic Operation) ❾ After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cord. 2. Disconnect any other cables. 3. Mount the lens cap on the lens. 4. Before moving the projector, screw in the tilt feet if they have been lengthened.
3. Convenient Features ❶ Turning off the Image and Sound The projected video and the output sound from the internal speaker and sound output terminal will disappear momentarily. Press the BLANK button. The projected video will be cut off. Press the MUTE button. The projected audio will be cut off. Press the AV-MUTE button. The projected video and audio will be cut off. Ethernet • Press the buttons one more time for the cancelled video and audio to appear again.
3. Convenient Features ❷ Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing back. ❸ Enlarging a Picture You can enlarge the picture up to four times. NOTE: • Depending on an input signal, the maximum magnification may be less than four times, or the function may be restricted. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. 2. Press the ▲▼◀▶ button.
3. Convenient Features ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] Description [OFF] This is the default setting (100% Brightness). [ON] Low lamp power consumption (approx. 80% Brightness). To turn on the [ECO MODE], do the following: 1. Press the ECO button on the remote control to display [ECO MODE] screen. 2.
3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [OFF], or [ON]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS] message shows the total amount of CO2 emission reduction from the time of shipment up to now. You can check the information on [USAGE TIME] from [INFO.
3. Convenient Features ❺ Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. 1. Press and hold the Geometric. button for a minimum of 2 seconds to reset current adjustments. Current adjustments for [GEOMETRIC CORRECTION] will be cleared. 2.
3. Convenient Features 5. Press the ▼ button to align with the [CORNERSTONE] and then press the ENTER button. The drawing shows the upper left icon ( ) is selected. The screen will switch to the [CORNERSTONE] screen. NOTE: • When a [GEOMETRIC CORRECTION] function other than [CORNERSTONE] has been set up, the [CORNERSTONE] screen will not be displayed. When the screen is not displayed, either press the Geometric.
3. Convenient Features 11. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button. This completes the [CORNERSTONE] correction. • Select [CANCEL] and press the ENTER button to return to the [CORNERSTONE] screen. Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3). Selecting [RESET] will return to the factory default. Selecting [UNDO] will exit without saving changes.
3. Convenient Features ❻ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Security function: 1. Press the MENU button.
3. Convenient Features 7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the MENU button. 3. Type in the correct keyword and press the ENTER button.
3. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [CONTROL] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword, contact your dealer.
3. Convenient Features ❼ Projecting 3D videos This projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewear. In order to synchronize the 3D video and eyewear, a commercially-available 3D emitter needs to be connected to the projector (on the projector side). The 3D eyewear receives information from the 3D emitter and performs opening and closing on the left and right.
3. Convenient Features (2) Press the ▼ button to align the cursor with the [FORMAT] and press the ENTER button. The format screen will be displayed. (3) Select the input signal format using the ▼ button and then press the ENTER button. The 3D settings screen will disappear and the 3D video will be projected. Press the MENU button and the on-screen menu will disappear. The 3D caution message screen will be displayed when switching to a 3D video (default factory setting when shipped).
3. Convenient Features When videos cannot be viewed in 3D Please check the following points when videos cannot be viewed in 3D. Please also read the operating manual attached to the 3D eyewear. Possible reasons Solutions The selected signal does not support 3D output. Please change the video signal input to one that supports 3D. The format for the selected signal is turned to [OFF(2D)]. Please change the format in the on-screen menu to [AUTO] or a format that supports 3D.
3. Convenient Features ❽ Controlling the Projector by Using an HTTP Browser Overview Using the web browser on the computer, the HTTP server screen of the projector can be displayed to operate the projector. For the HTTP server screen of the projector, there is the basic HTTP server screen and the dedicated HTTP server screen. Possible operations on the HTTP server screen (1) Possible operations on the basic HTTP server screen • Configure the email notification.
3. Convenient Features • This projector uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software. Preparation before Use Connect the projector to a commercially available LAN cable before engaging in browser operations.
3.
3. Convenient Features PICTURE: Controls the video adjustment of the projector. BRIGHTNESS ▲ Increases the brightness adjustment value. • BRIGHTNESS ▼ Decreases the brightness adjustment value. CONTRAST ▲ Increases the contrast adjustment value. CONTRAST ▼ Decreases the contrast adjustment value. COLOR ▲ Increases the color adjustment value. COLOR ▼ Decreases the color adjustment value. HUE ▲ Increases the hue adjustment value. HUE ▼ Decreases the hue adjustment value.
3. Convenient Features NETWORK SETTINGS http:///index.html • SETTINGS WIRED SETTING Set for wired LAN. APPLY Apply your settings to wired LAN. PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. DISABLE Turn off wired LAN connection DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP server.
3. Convenient Features • NAME PROJECTOR NAME Enter a name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not be affected even when [RESET] is done from the menu. HOST NAME Enter the hostname of the network connected to the projector. A host name must be 15 or less. DOMAIN NAME Enter the domain name of the network connected to the projector. A domain name must be 60 characters or less.
3. Convenient Features • NETWORK SERVICE PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if you forget your password, consult with your dealer. HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less. When a password is set up, you will be prompted for your user name (arbitrary) and password during LOGON.
3. Convenient Features NETWORK SETTINGS http:///index.html • SETTINGS WIRED or WIRELESS SETTING Set for wired LAN or for wireless LAN. APPLY Apply your settings to wired LAN or wireless LAN. DISABLE Turn off wired LAN connection PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP server.
3. Convenient Features SITE SURVEY Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access. NETWORK TYPE Select communication method when using wireless LAN. INFRASTRUCTURE: Select this option when communicating with one or more equipment connected to the wireless LAN network via a wireless access point. AD HOC: Select this option when using the wireless LAN to directly communicate with a computer in peer-to-peer mode.
3. Convenient Features • NETWORK SERVICE HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less. • CRESTRON ROOMVIEW for managing from the computer. DISABLE Disables ROOMVIEW. ENABLE Enables ROOMVIEW. CRESTRON CONTROL for managing from the controller. DISABLE Disables CRESTRON CONTROL. ENABLE Enables CRESTRON CONTROL. IP ADDRESS Set your IP address of CRESTRON SERVER. IP ID Set your IP ID of CRESTRON SERVER.
3. Convenient Features ❾ Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR] By selecting the projector connected to the same network as that of your PC, the PC screen image can be projected to the screen via network. There is no need of connection using the computer cable (VGA). Operation Environment Applicable OS Windows Windows Windows Windows Windows Windows Windows Windows Windows 8/8.1 Pro 8/8.
3. Convenient Features • When operating with the main body, press briefly the “INPUT” button to display the [INPUT TERMINAL] screen of the onscreen menu. Press the ▼ button to select [8:ETHERNET] and then press the “ENTER” button to display the application menu screen. 2. Press the SELECT ▼ or ▲ button to select [NETWORK] and press the ENTER button. In the screen, the [APPLICATION MENU] menu is displayed. 3. From the [APPLICATION MENU] menu, select [NETWORK PROJECTOR].
3. Convenient Features Projecting the Image with Network Projector 1. Click [Start] from the desktop of Windows 7. 2. Click [All Programs]. 3. Click [Accessories]. 4. Click [Connect to a Network Projector]. When the [Permission Connect to a Network Projector] window appears,click [Yes.]. The “Connect to a Network Projector” window appears. 5. Click [→ Search for a projector (recommended)]. In the “Available projectors” box, “WU6181N Series” is displayed. 6. Click [WU6181N Series].
3. Convenient Features 7. Input the password to the password input box displayed by the operation at step 3 on page 53. 8. Click [Connect]. The network projector function works and the screen of Windows 7 is projected from the projector. • If the resolution of your computer’s screen is different from the projector’s screen resolution, the NETWORK PROJECTOR function may not work. If this happens, change the resolution of the computer’s screen to lower resolution than the one displayed at Step 3 on page 53.
3. Convenient Features ❿ Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP] • By selecting the PC connected to the same network as that of the projector, the PC screen image can be projected to the screen via network. Then, by operating the keyboard, you can operate Windows 8/8.1, Windows 7, Windows Vista on the PC connected with the network. • With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector.
3. Convenient Features Setting the password to the user account of Windows 7 TIP: If a password has been set for an account, the steps 1 to 9 can be skipped. 1. Click [Start] from the desktop of Windows 7. 2. Click [Control Panel]. 3. Click [Add or remove user accounts] displayed under [User Accounts]. 4. When the [User Account Control] confirmation window appears, click [Continue]. 5. Click [Administrator]. 6. Click [Create a password]. 7. Input the password to the [New password] box. 8.
3. Convenient Features 4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window. The [Local Area Connection Status] window appears. 5. Click [Details...]. Write down the value for “IPv4 IP Address” (xxx.xxx.xxx.xxx) displayed. 6. Click [Close]. 7. Click [X] at the upper right of the window. The system goes back to the desktop. Starting the Remote Desktop 1. Press the “8/Ethernet” button on the remote control with the power supply to the projector turned on.
3. Convenient Features • When operating with the main body, press briefly the “INPUT” button to display the [INPUT TERMINAL] screen of the onscreen menu. Press the ▼ button to select [8:ETHERNET] and then press the “ENTER” button to display the application menu screen. The [REMOTE DESKTOP CONNECTION] window appears. 2. Operate the wireless keyboard to input the IP address of Windows 7 and click [CONNECTION]. The log-on screen of Windows 7 is displayed in the screen projected by the projector. 3.
3. Convenient Features Exiting the Remote Desktop 1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector. 2. Click [X] on the right of the start menu. The remote desktop function is stopped. 3. Press the button for an input terminal other than “8/Ethernet” on the remote control. Switch the input terminal using the “INPUT” button for operations on the main body. TIP: Setting [OPTIONS] in REMOTE DESKTOP Clicking [OPTIONS] displays the [PERFORMANCE] screen.
4. Multi-Screen Projection ❶ Things that can be done using multi-screen projection This projector can be used singly or arranged in multiple units for multi-screen projection. We will introduce an example using two projection screens here. Case 1 Using a single projector to project two types of videos at the same time [PIP/PICTURE BY PICTURE] Case 2 Using four projectors (liquid crystal panel: XGA) to project video with a resolution of 1920 × 1080 pixels [TILING] Case 1.
4. Multi-Screen Projection Case 2. Using four projectors (liquid crystal panel: XGA) to project videos with a resolution of 1920 × 1080 pixels [TILING] Connection example and projection image On-screen menu operations 1 Four similar videos are displayed when four projectors are projected. Please request the retail store to adjust the projection position of each projector. NOTE: • When setting up the projector, assign a unique control ID to each projector.
4. Multi-Screen Projection 2 Operate the on-screen menu using the four respective projectors to divide the image into four portions. Display [DISPLAY] → [MULTI SCREEN] → [PICTURE SETTING] Screen in the on-screen menu and select [TILING]. (1) In the screen for setting the number of horizontal units, select [2 UNITS]. (number of units in the horizontal direction) (2) In the screen for setting the number of vertical units, select [2 UNITS].
4. Multi-Screen Projection Things to note when installing projectors • Leave sufficient space on the left and right of the projector so that the intake and exhaust vents of the projector are not obstructed. When the intake and exhaust vents are obstructed, the temperature inside the projector will rise and this may result in a malfunction. • Please do not pile up the projectors directly on top of one another when installing them.
4. Multi-Screen Projection ❷ Displaying Two Pictures at the Same Time The projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIP mode and PICTURE BY PICTURE mode. The projection video in the first screen display is known as the main display while the projection video that is called out subsequently is known as the sub-display.
4. Multi-Screen Projection Projecting two screens 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button. This displays the [SUB INPUT] screen. 3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.
4. Multi-Screen Projection Switching the main display with the sub-display and vice versa 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [PICTURE SWAP] using the ▼/▲ buttons and then press the ENTER button. Display the screen for switching the display positions. 3. Select [ON] using the ▼ button and then press the ENTER button.
4. Multi-Screen Projection Restrictions • The following operations are enabled only for the main display. • Audio-visual adjustments • Video magnification / compression using the partial D-ZOOM/ZOOM +/− buttons. However, magnification / compression is up to the positions set in [PICTURE BY PICTURE BORDER] only. • • TEST PATTERN The following operations are enabled for both the main display and sub-display. These operations cannot be applied individually.
4. Multi-Screen Projection ❸ Displaying a Picture Using [EDGE BLENDING] A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and bottom.This projector is equipped with an “EDGE BLENDING Function” that makes the edges (boundaries) of the projection screen indistinguishable. NOTE: • For projector throw distances, refer to “Throw distance and screen size” on page 231.
4. Multi-Screen Projection Preparation: • Turn on the projector and display a signal. • When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate the other projectors. (→ page 118) Setting the overlap of projection screens ① Enable [EDGE BLENDING]. 1 Press the “Edge Blend.” button. The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button. The mode screen will be displayed.
4. Multi-Screen Projection 4 Select [CONTROL] → [ON] and press the ENTER button. Each [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] has its own [CONTROL], [MARKER], [RANGE], and [POSITION]. • For Projector A, set the [CONTROL] for the [TOP], [LEFT] and[BOTTOM] to [OFF]. Similarly for Projector B, set the [CONTROL] for the [TOP], [RIGHT] and [BOTTOM] to [OFF]. ② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images projected from each projector.
4. Multi-Screen Projection 1 Adjust [RANGE]. Use the ◀ or ▶ button to adjust the overlapped area. TIP: • Adjust to overlap one projector’ marker with the other projector’s marker. 2 Adjust [POSITION]. Use the ◀ or ▶ button to align one edge with the other edge of overlapped images. TIP: • When displaying a signal with a different resolution, perform the Edge Blending function from the start. • Setting of [MARKER] will not be saved and return to [OFF] when the projector is turned off.
4. Multi-Screen Projection Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: This function is enabled only when [MODE] is turned on. Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
4. Multi-Screen Projection 9-segmented portions for Black Level adjustment The center projector This function adjusts the brightness level of 9-segmented portions for the center projector and 4-segmented portions for the left bottom projector as shown below.
5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation. 2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu. 3.
5. Using On-Screen Menu ❷ Menu Elements Slide bar Slide bar Tab Solid triangle Available buttons Source Menu mode Highlight Radio button ECO mode symbol Off Timer remaining time High Altitude symbol Thermometer symbol Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight Indicates the selected menu or item. Solid triangle Indicates further choices are available. A highlighted triangle indicates the item is active.
5. Using On-Screen Menu ❸ List of Menu Items • Basic menu items are indicated by shaded area. Some menu items are not available depending on the input source. Menu Item INPUT Default * * * * * * * 1:HDMI1 2:HDMI2 3:DisplayPort 4:BNC 5:BNC(CV) 6:BNC(Y/C) 7:COMPUTER 8:ETHERNET 9:USB-A ENTRY LIST TEST PATTERN MODE Options STANDARD STANDARD, PROFESSIONAL HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, * DICOM SIM.
5.
5. Using On-Screen Menu Menu Item Default MENU LANGUAGE ENGLISH COLOR SELECT INPUT DISPLAY MESSAGE DISPLAY ID DISPLAY ECO MESSAGE 3D CAUTION MESSAGE COLOR ON ON ON OFF ON AUTO 45 SEC OFF DISPLAY TIME FILTER MESSAGE SETUP ORIENTATION AUTO SCREEN TYPE FREE WALL COLOR OFF FAN MODE LAMP MODE INSTALLATION REF.
5.
5.
5. Using On-Screen Menu Menu Item Default USAGE TIME SOURCE(1) SOURCE(2) SOURCE(3) INFO. SOURCE(4) WIRED LAN VERSION(1) VERSION(2) OTHERS CONDITIONS LAMP LIFE REMAINING LAMP HOURS USED FILTER HOURS USED TOTAL CARBON SAVINGS INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO. SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL LINK RATE LINK LANE 3D FORMAT INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY SYNC TYPE SOURCE NAME ENTRY NO.
5. Using On-Screen Menu ❹ Menu Descriptions & Functions [INPUT] 1:HDMI1 This projects the video of the device connected to the HDMI 1 IN terminal. 2:HDMI2 This projects the video of the device connected to the HDMI 2 IN terminal. 3:DisplayPort This projects the video of the device connected to the Display Port input terminal. 4:BNC This projects the video of the device connected to the video input terminal. (This projects the analog RGB signal or component signal.
5. Using On-Screen Menu Using the Entry List When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjustment values of) registered signals can be loaded from the Entry List whenever necessary. However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, an error message is then displayed and no additional patterns can be registered.
5. Using On-Screen Menu Entering the currently projected signal into the Entry List [STORE] 1. Press the ▲ or ▼ button to select any number. 2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button. Calling up a signal from the Entry List [LOAD] Press the ▲ or ▼ button to select a signal and press the ENTER button. Editing a signal from the Entry List [EDIT] 1. Press the ▲ or ▼ button to select a signal you wish to edit. 2.
5. Using On-Screen Menu Cutting a signal from the Entry List [CUT] 1. Press the ▲ or ▼ button to select a signal you wish to delete. 2. Press the ◀, ▶, ▲, or ▼ button to select [CUT] and press the ENTER button. The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom of the Entry List. NOTE: • The currently projected signal cannot be deleted. • When the locked signal is selected, it will be displayed in gray which indicates it is not available.
5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input. STANDARD ��������������������Saves settings for each item of [PRESET] (Preset 1 through 7) PROFESSIONAL ���������Saves all the settings of [PICTURE] for each input. NOTE: • When [TEST PATTERN] is displayed, [MODE] cannot be selected.
5. Using On-Screen Menu [DETAIL SETTINGS] [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT ��������������Recommended for use in a brightly lit room. PRESENTATION ����������Recommended for making a presentation using a PowerPoint file.
5. Using On-Screen Menu Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice. A value between 5000 K and 10500 K can be set in 100 K units. NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available. Adjusting Brightness and Contrast [DYNAMIC CONTRAST] When set, the most optimal contrast ratio is adjusted according to the video. OFF ������������������������������������Dynamic contrast is disabled.
5. Using On-Screen Menu [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/− green to +/− blue. The red level is used as reference.
5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the first time.
5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. • An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. • The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied.
5. Using On-Screen Menu Selecting the Aspect Ratio [ASPECT RATIO] Use this function to select the screen’s vertical:horizontal aspect ratio. Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio. (→ page 112) The projector automatically identifies the signal being input and sets the optimum aspect ratio.
5. Using On-Screen Menu Options Function 16:10 The image is displayed in 16:10 aspect ratio NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower or higher resolution than the projector’s native resolution. (→ page 2) When the incoming computer signal has a higher resolution than the projector's native resolution, the center of an image will be displayed.
5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] When projecting a video image, you can use the [NOISE REDUCTION] function to reduce the screen noise (roughness and distortion). This device is equipped with three types of noise reduction functions. Select the function according to the type of noise. Depending on the noise level, the noise reduction effect can be set to [OFF], [LOW], [MEDIUM] or [HIGH].
5. Using On-Screen Menu [SIGNAL TYPE] Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting if the color of the image remains unnatural. AUTO ��������������������������������Automatically distinguishes RGB and component signals. RGB ������������������������������������Switches to the RGB input. COMPONENT ��������������Switches to the component signal input.
5. Using On-Screen Menu [3D SETTINGS] Please refer to “3-8 Projecting 3D videos” (→ page 39) for the operation. STEREO VIEWER Stack up a single or multiple projectors and carry out the settings for projecting 3D videos. Select the left / right settings of the 3D eyewear using the stereo viewer. SINGLE Use a single projector to project 3D videos. DUAL LEFT Use a dedicated projector for displaying videos on the left. DUAL RIGHT Use a dedicated projector for displaying videos on the right.
5. Using On-Screen Menu ❻ Menu Descriptions & Functions [DISPLAY] [PIP/PICTURE BY PICTURE] SUB INPUT Select the input signal to be displayed in the sub-display. Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 65) for details on the operation. MODE Select either PIP or PICTURE BY PICTURE when switching to 2-screen display. PICTURE SWAP The videos in the main display and sub-display will be switched.
5. Using On-Screen Menu TIP: The horizontal position and vertical position are the amount of movement from the reference points. For example, when TOP-LEFT is adjusted, the position is displayed with the same amount of movement even if displayed with other starting positions. The maximum amount of movement is half the resolution of the projector.
5. Using On-Screen Menu [GEOMETRIC CORRECTION] KEYSTONE Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen. To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the Geometric. button on the remote control. HORIZONTAL ���������������Adjustments when projecting from a diagonal direction to the screen.
5. Using On-Screen Menu CORNERSTONE Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen. Please refer to “Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]” (→ page 33) for details on the operation. HORIZONTAL CORNER/VERTICAL CORNER Distortion correction for corner projection such as wall surfaces.
5. Using On-Screen Menu Adjustment method 1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORRECTION] menu and then press the ENTER button. • The adjustment screen will be displayed. 2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button. • The cursor will change into an adjustment point (yellow in color). 3.
5. Using On-Screen Menu PINCUSHION Adjust the curve distortion of the projection screen. TOP ������������������������������������Adjust the curve distortion of the upper edge of the projection screen. BOTTOM ������������������������Adjust the curve distortion of the lower edge of the projection screen. TOP LEFT RIGHT LEFT �����������������������������������Adjust the curve distortion of the left edge of the projection screen.
5. Using On-Screen Menu [EDGE BLENDING] This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combination of several projectors in the up, down, left and right positions. MODE This enables or disables the EDGE BLENDING function. When MODE is set to ON, the TOP, BOTTOM, LEFT, RIGHT and BLACK LEVEL settings can be adjusted. TOP/BOTTOM/LEFT/RIGHT This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen.
5. Using On-Screen Menu [MULTI SCREEN] WHITE BALANCE This adjusts the white balance for each projector when projecting using a combination of several projectors. This can be adjusted when [MODE] is set to [ON]. BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B ���������������������������������������������Adjusting the black color of the video. CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B ���������������������������������������������Adjusting the white color of the video.
5. Using On-Screen Menu Conditions for using tiling • All the projectors need to fulfil the following conditions. • The panel size must be the same • The projection screen size must be the same • The left and right ends or top and bottom ends of the projection screen must be consistent.
5. Using On-Screen Menu ❼ Menu Descriptions & Functions [SETUP] [MENU] Selecting Menu Language [LANGUAGE] You can choose one of 29 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME.
5. Using On-Screen Menu Turning On / Off Eco Message [ECO MESSAGE] This option turns on or off the following messages when the projector is turned on. The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message to prompt you to select [ON] for [ECO MODE]. When [ON] is selected for [ECO MODE] To close the message, press any one of the buttons. The message will disappear if no button operation is done for 30 seconds.
5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. NOTE: • Please consult the retail store if you require special installation services e.g. when mounting the projector to a ceiling. Never install the projector on your own. This may result in the projector falling down and causing injury to people.
5. Using On-Screen Menu Selecting Aspect Ratio and Position for Screen [SCREEN TYPE] Screen type Sets the aspect ratio of the projection screen. FREE The ratio of the liquid crystal panel is selected. Select this when projecting multiscreen and 17:9 screen (2K). 4:3 screen For a screen with a 4:3 aspect ratio 16:9 screen For a screen with a 16:9 aspect ratio 16:10 screen For a screen with a 16:10 aspect ratio NOTE: • After changing the screen type, check the setting of [ASPECT RATIO] in the menu.
5. Using On-Screen Menu [LAMP MODE] When eco-mode is set to [ON], the CO2 emissions (calculated from the reduction in power consumption) of the projector can be reduced. The eco-mode reduces power consumption by mainly lowering the brightness of the lamp. As a result, the lamp replacement time (as a guide)* is extended. (→ page 31, 131) * Replacement time not guaranteed. LAMP ADJUST ������������This can be set when the eco-mode is set to [OFF].
5. Using On-Screen Menu [CONTROL] TOOLS ADMINISTRATOR MODE This allows you to select MENU MODE, save settings, and set a password for the administrator mode. MENU MODE Select either [BASIC] or [ADVANCED] menu. (→ page 84) — NOT SAVE SETTING VALUES Placing a check mark will not save your projector settings. Clear this check box to save your projector settings. — NEW PASSWORD/CONFIRM PASSWORD Assign a password for the administrator mode.
5. Using On-Screen Menu PROGRAM TIMER This option turns on/standby the projector and changes video signals, and selects ECO mode automatically at a specified time. NOTE: • Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 115) Make sure that the projector is in the standby condition with the POWER cord connected. The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off.
5. Using On-Screen Menu FUNCTION ���������������������Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector by setting [ADVANCED SETTINGS]. Selecting [INPUT] will allow you to select a video source by setting [ADVANCED SETTINGS]. Selecting [ECO MODE] will allow you to select [ECO MODE] by setting [ADVANCED SETTINGS].
5. Using On-Screen Menu Activating the program timer 1. Select [ENABLE] on the [PROGRAM TIMER] screen and press the ENTER button. The selection screen will be displayed. 2. Press the ▼ button to align the cursor with [ON] and then press the ENTER button. Return to the [PROGRAM TIMER] screen. NOTE: • When the effective settings of the [PROGRAM TIMER] have not been set to [ON], the program will not be executed even if the [ACTIVE] items in the program list have been ticked.
5. Using On-Screen Menu DATE AND TIME SETTINGS You can set the current time, month, date, and year. NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the main power is off for 2 weeks or more, the built-in clock will cease. If the built-in clock ceases, set the date and time again. The built-in clock will not cease while in the standby mode. TIME ZONE SETTINGS ���������������������� Select your time zone.
5. Using On-Screen Menu Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • How to cancel the [CONTROL PANEL LOCK] When the [CONTROL PANEL LOCK] is set to [ON], press the EXIT button or the INPUT button on the main body for about 10 seconds to cancel the [CONTROL PANEL LOCK] setting. TIP: • When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
5. Using On-Screen Menu Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control. To do so, you have to assign an ID number to each projector. CONTROL ID NUMBER ����������� Select a number from 1 to 254 you wish to assign to your projector.
5. Using On-Screen Menu Turning On or Off Remote Sensor [REMOTE SENSOR] This option determines which remote sensor on the projector is enabled in wireless mode. The options are: FRONT/BACK, FRONT, BACK. TIP: • If the remote control system does not function when direct sunlight or strong illumination strikes the remote control sensor of the projector, change another option.
5. Using On-Screen Menu [NETWORK SETTINGS] Important: • Consult with your network administrator about these settings. • When using a wired LAN, connect the Ethernet cable (LAN cable) to the Ethernet port on the projector. (→ page 166) TIP: The network settings you make will not be affected even when [RESET] is done from the menu. About the Projector's [NETWORK SETTING].
5. Using On-Screen Menu WIRED LAN PROFILES • The settings for using the built-in Ethernet port in the projector can — be recorded in the projector memory in two ways. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. After doing this, select [OK] and press the ENTER button. This will store your settings in memory. • To recall the settings from memory: After selecting [PROFILE 1] or [PROFILE 2] from the [PROFILES] list. Select [OK] and press the ENTER button.
5. Using On-Screen Menu PROJECTOR NAME PROJECTOR NAME Set a unique projector name. Up to 16 alphanumeric characters and symbols DOMAIN Set a host name and domain name of the projector. HOST NAME Set a host name of the projector. Up to 15 alphanumeric characters DOMAIN NAME Set a domain name of the projector.
5. Using On-Screen Menu ALERT MAIL ALERT MAIL This option will notify your computer of lamp replace time or error — messages via e-mail when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. Sample of a message to be sent from the projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: rdpj Lamp Hours Used: 100 [H] HOST NAME Type in a host name.
5. Using On-Screen Menu NETWORK SERVICE HTTP SERVER Set a password for your HTTP server. Up to 10 alphanumeric characters PJLink This option allows you to set a password when you use the PJLink feature. Up to 32 alphanumeric characters NOTE: • Do not forget your password. However, if you forget your password, consult with your dealer. • What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers.
5. Using On-Screen Menu [SOURCE OPTIONS] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ������������������������������������The computer signal will not be automatically adjusted. You can manually optimize the computer signal. NORMAL ������������������������Default setting.
5. Using On-Screen Menu Selecting Default Source [DEFAULT INPUT SELECT] You can set the projector to default to any one of its inputs each time the projector is turned on. LAST ����������������������������������Sets the projector to default to the previous or last active input each time the projector is turned on. AUTO ��������������������������������Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMPUTER and displays the first found source.
5. Using On-Screen Menu [POWER OPTIONS] Selecting Power-saving in [STANDBY MODE] Setting the power consumption in the standby mode. NORMAL ������������������������In the standby mode, the power consumption of the projector is 0.11 W (100-130 V)/0.16 W (200-240 V). In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off. • When set to [NORMAL], the following terminals and functions will be disabled.
5. Using On-Screen Menu Turning On the Projector by Detecting Input Signal [AUTO POWER ON SELECT] Under the condition of [NETWORK STANDBY], the projector automatically detects and projects synchronizing signal input from the selected terminals among Computer, HDMI1/2, DisplayPort by this function. OFF ������������������������������������AUTO POWER ON SELECT function becomes inactive.
5. Using On-Screen Menu Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
5. Using On-Screen Menu Clearing the Filter Usage Hours [CLEAR FILTER HOURS] Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need to clear the filter usage hour. NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
5. Using On-Screen Menu ❽ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] The sub-menu tab in the [INFO.] display will become [USAGE TIME]/[SOURCE(1)]/[SOURCE(2)]/[WIRED LAN]/[VERSION(1)]/[VERSION(2)]/[OTHERS]/[CONDITIONS].
5. Using On-Screen Menu [SOURCE(1)] INPUT TERMINAL HORIZONTAL FREQUENCY SYNC TYPE SCAN TYPE ENTRY NO. RESOLUTION VERTICAL FREQUENCY SYNC POLARITY SOURCE NAME [SOURCE(2)] SIGNAL TYPE BIT DEPTH LINK RATE 3D FORMAT VIDEO TYPE VIDEO LEVEL LINK LANE [SOURCE(3)] INPUT TERMINAL HORIZONTAL FREQUENCY SOURCE NAME RESOLUTION SYNC TYPE ENTRY NO.
5.
5. Using On-Screen Menu [OTHERS] DATE TIME MODEL NO. CONTROL ID (when [CONTROL ID] is set) PROJECTOR NAME SERIAL NUMBER [CONDITIONS] INTAKE TEMPERATURE INSTALLATION POSITION Y-AXIS EXHAUST TEMPERATURE X-AXIS Z-AXIS About the X-AXIS, Y-AXIS and Z-AXIS CONDITIONS * Arrow direction of the Z-AXIS in the figure represents the top of the projector. X-AXIS �����������������������������Display the projector image at an angle of −100 – +100 degrees to the horizontal in the X-axis direction.
5. Using On-Screen Menu Z-AXIS ������������������������������Display the projector image at an angle of −100 – +100 degrees to the vertical in the Z-axis direction.
5. Using On-Screen Menu ❾ Application Menu When [ETHERNET] is selected from the [INPUT] menu, the application menu [APPLICATION MENU] will be displayed. The application menu allows you to set up the User Supportware and Network Settings (NETWORK SETTINGS). The User Supportware is contained on the supplied CD-ROM. [ADVANCED] and [BASIC] can be selected in the [MENU MODE] under [SETUP] → [CONTROL] → [TOOLS] → [ADMINISTRATOR MODE].
5. Using On-Screen Menu NETWORK PROJECTOR This shows information for projector name, resolution, and network (wired/wireless) which are required to use Network Projector. Use this information to set up for your computer. REMOTE DESKTOP CONNECTION This allows you to set up for computer name entry and effects for Remote Desktop. NOTE: • A USB keyboard is required to set up the Remote Desktop Connection.
5. Using On-Screen Menu NETWORK SETTINGS(MM) Important: • Consult with your network administrator about these settings. • When using a wired LAN, connect the LAN cable (Ethernet cable) to the Ethernet port (LAN) of the projector. (→ page 166) • When using a wireless LAN, attach the wireless LAN unit sold separately to the projector. (→ page 167) TIP: The [NETWORK SETTINGS(MM)] you make will not be affected even when [RESET] is done from the menu. About the Projector's [NETWORK SETTING].
5. Using On-Screen Menu WIRED LAN or WIRELESS LAN (ADVANCED menu only) PROFILES • Up to two settings for the Ethernet port or USB wireless LAN unit — can be stored in memory of the projector. Total of four settings can be stored. Five settings can be stored: two for the built-in Ethernet port, two for wireless LAN and one for WPS. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. After doing this, select [OK] and press the ENTER button.
5. Using On-Screen Menu DHCP Place a check mark to automatically assign an IP address to the projector — from your DHCP server. Clear this check box to register the IP address or subnet mask number obtained from your network administrator. IP ADDRESS Set your IP address of the network connected to the projector when Up to 12 numeric char[DHCP] is turned off. acters SUBNET MASK Set your subnet mask number of the network connected to the projector Up to 12 numeric charwhen [DHCP] is turned off.
5. Using On-Screen Menu SECURITY This will turn on or off the encryption mode for secure transmission. — To use encryption, specify a WEP key or encryption key. Select your security type appropriate for your computer and the wireless LAN unit. DISABLE ��������������������������Will not turn on the encryption feature. Your communications may be monitored by someone. WEP(64bit) �������������������Uses 64-bit datalength for secure transmission.
5. Using On-Screen Menu When [WPA-PSK], [WPA-EAP], [WPA2-PSK], or [WPA2-EAP] is selected for [SECURITY TYPE] ENCRYPTION TYPE Select [TKIP] or [AES]. KEY Enter encryption key. Key length must be 8 or greater and 63 or less.
5. Using On-Screen Menu [AUTHENTICATION] (required for wireless only) Setting is required for using WPA-EAP or WPA2-EAP. Preparation before setting Select a wireless LAN compliant WPA-EAP or WPA2-EAP authentication and install a digital certificate on the projector. 1. Set [DATE AND TIME] on the projector. (→ page 116) 2. Use a computer to save digital certificates (files) for WPA-EAP or WPA2-EAP setting to your USB memory device.
5. Using On-Screen Menu 4. Select [SITE SURVEY] and press the ENTER button. The “SSID” list will be displayed. 5. Select a connecting SSID, and then select [OK]. Finally press the ENTER button. • Select the SSID for which WPA-PSK or WPA2-PSK is set. • Select [INFRASTRUCTURE ( [AD HOC ( )] is selected. )] for [NETWORK TYPE]. WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-EAP is not available when 6. Select the [SECURITY] tab. The [SECURITY] page will be displayed. 7.
5. Using On-Screen Menu 11. Select the [AUTHENTICATION] tab. The [AUTHENTICATION] page will be displayed. Select either [EAP-TLS] or [PEAP-MSCHAPv2] for [EAP TYPE]. The setting items vary depending on the EAP type. See the table below.
5. Using On-Screen Menu 13. Select [CLIENT CERTIFICATE] and press the ENTER button. A list of files ([FILES] screen) will be displayed. • For operating the [FILES] screen. • To return to the [AUTHENTICATION] page, press the EXIT button. NOTE: Installing a digital certificate You can install each digital certificate (client certificate and CA certificate) for [PROFILE 1 (or 2)] on a file-by-file basis. • Install a root CA certificate for a CA certificate.
5. Using On-Screen Menu 17. On the [FILES] screen, select a digital certificate (DER format file) saved in your USB memory device and press the ENTER button. • Select your root CA certificate here. The selected digital certificate will be installed on the projector. 18. After completing required settings, select [OK] and press the ENTER button. The [WIRELESS] page will be returned. 19. Select [RECONNECT] and press the ENTER button. 20. Select [OK] and press the ENTER button.
5. Using On-Screen Menu 15. After completing setting a user name, select the [PASSWORD] field and press the ENTER button. The character entry screen (software keyboard) will be displayed. Set a password. • A password must be 32 characters or less. 16. After completing setting the password, select [CA CERTIFICATE] field and press the ENTER button. The drive list screen will be displayed. • For operating the thumbnail screen. • To return to the [AUTHENTICATION] page, press the EXIT button.
5. Using On-Screen Menu 18. After completing required settings, select [OK] and press the ENTER button. The [WIRELESS] page will be returned. 19. Select [RECONNECT] and press the ENTER button. 20. Select [OK] and press the ENTER button. This will complete setting [PEAP-MSCHAPv2] for [EAP TYPE] in [WPA-EAP] or [WPA2-EAP]. TIP: Clearing the digital certificate that is installed on the projector To clear the digital certificate installed on the projector, follow the steps below.
5. Using On-Screen Menu WPS(MM) When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup™), you can use PIN method or push button method to set up the wireless LAN for the projector. PIN TYPE Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the SSID security. PUSH BUTTON TYPE Press the dedicated button of the access point and the projector’s wireless LAN unit to complete setting for the SSID security.
5. Using On-Screen Menu HOST NAME (ADVANCED menu only) Setting up the host name of the projector. HOST NAME Set a host name of the projector.
5. Using On-Screen Menu HTTP SERVER (ADVANCED menu only) Password setting when using a HTTP server. HTTP SERVER Set a password for your HTTP server.
6. Connecting to Other Equipment ❶ Mounting a lens (sold separately) Six separate bayonet style lenses can be used with this projector. The descriptions here are for the Standard lens Type1 (2x zoom) lens. Mount other lenses in the same manner. NOTE: • The projector and lenses are made of precision parts. Do not subject them to shock or excessive forces. • Remove the separately sold lens when moving the projector.
6. Installation and Connections 4. Turn the lens clockwise. Turn until a click is heard. The lens is now fastened onto the projector. TIP: Mounting the lens theft prevention screw Fasten the lens theft prevention screw included with the projector to the bottom of the projector so that the lens cannot be removed easily. Removing the lens 1. While pressing the lens release button on the projector’s front panel fully in, turn the lens counterclockwise. The lens comes off.
6. Installation and Connections ❷ Making Connections A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. Analog RGB signal connection • Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the computer video input terminal on the projector.
6. Installation and Connections Digital RGB signal connection • Connect a commercially available HDMI cable between the computer’s HDMI output connector and the projector’s HDMI1 or HDMI2 input connector. • Connect a commercially available DisplayPort cable between the computer’s DisplayPort output connector and the projector’s DisplayPort input connector.
6. Installation and Connections Cautions when connecting an HDMI cable • Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet. Cautions when connecting a DisplayPort cable • Use a certified DisplayPort cable. • Depending on the computer, some time may be required until the image is displayed. • Some DisplayPort cables (commercially available) have locks. • To disconnect the cable, press the button on the top of the cable’s connector, then pull the cable out.
6. Installation and Connections Cautions when using a DVI signal • When the computer has a DVI output connector, use a commercially available converter cable to connect the computer to the projector’s HDMI 1 or HDMI 2 input connector (only digital video signals can be input). Also, connect the computer’s audio output to the projector’s BNC audio input connector. In this case, switch the HDMI1 or HDMI2 setting at on-screen menu’s audio selection on the projector to [BNC].
6. Installation and Connections Connecting an External Monitor HDM IOUT AUDIO OUT Stereo mini-plug audio cable (not supplied) HDMI cable (not supplied) HDM IIN AUDIO IN Computer cable (VGA) (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. • Please refer to Page 65 when displaying the [PIP/PICTURE BY PICTURE] screen.
6. Installation and Connections Connecting Your Blu-ray Player or Other AV Equipment Component video signal/S-video signal connection BNC (Y )IN BNC (C )IN BNC (CV )IN AUDIO IN Audio cable (not supplied) BNC cable (not supplied) Audio equipment CV Y C Audio cable (not supplied) • Select the source name for its appropriate input connector after turning on the projector.
6. Installation and Connections Connecting Component Input AUDIO IN COM PUTER IN AUDIO IN 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) BNC (male) - to - RCA (male) conversion cable × 3 (sold commercially) Stereo mini plug - to - RCA audio cable (not supplied) Component video RCA × 3 cable (not supplied) Blu-ray player Audio Equipment • Select the source name for its appropriate input connector after turning on the projector.
6. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to the HDMI 1 IN or HDMI 2 IN connector of your projector. HDM I1 IN HDM I2 IN HDMI cable (not supplied) Use High Speed HDMI® Cable.
6. Installation and Connections Portrait projection (vertical orientation) Portrait screens from a computer can be projected by installing the projector in a vertical orientation. All the screens such as the on-screen menu will be rotated in an counter-clockwise direction. The projector is equipped with a sensor to automatically detect the installation state.
6. Installation and Connections Reference drawings * The drawing showing the dimensional requirements is not an actual stand design drawing. [Side View] 200 [Front View] Screw holes for 4 - M4 use [Bottom View] 310 or greater Filter cover Tilt foot (remove) Rear foot 130 or greater Filter cover (when opened) Horizontal adjuster Lens shift securing method 1. Pull the securing lever cover towards you to remove it. • The cover cannot be detached from the projector. 2.
6. Installation and Connections 3. Slide the securing lever towards the top until it comes to a stop and then turn the screws to the right to tighten them. • Tighten the screws while pressing the securing lever towards the top. * Loosen the screws first before re-adjusting the lens shift. 4. Fix the four securing lever covers. NOTE: • Determine the screen position first before using the securing levers. • Do not turn the zoom ring when using the securing lever. Please do not remove the lens either.
6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a Ethernet port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [NETWORK SETTINGS] → [WIRED LAN]. (→ page 121). Example of LAN connection Example of wired LAN connection Server Hub LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable.
6. Installation and Connections Connecting to a Wireless LAN (sold separately) The separately sold wireless LAN unit allows you to use a wireless LAN environment. When using the projector in a wireless LAN environment, the IP address and other settings must be made on the projector. Important: • If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector.
6. Installation and Connections 1. Press the button to set the projector to the standby mode, then disconnect the power cord. Wait for the projector to fully cool off. 2. Press down on the buttons on the left and right and then pull the filter cover towards you to open it. The cover will open about 90 degrees before it stops. Filter cover Button 3. Remove the filter unit by pulling out the tab.
6. Installation and Connections 6. Close the filter cover. After closing, push the filter cover near the buttons until a “click” sound is heard. The filter cover will be secured in position. Button To remove the wireless LAN unit 1. Remove the filter unit following steps 1 to 3 above. 2. Remove the wireless LAN unit. NOTE: Do not grasp the wireless LAN unit with excessive force. Doing so will damage it. 3. Mount the filter unit and filter cover as described in steps 5 and 6 above.
6. Installation and Connections Example of wireless LAN connection (Network Type → Infrastructure) PC with wireless LAN card inserted PC with built-in wireless LAN function USB Wireless LAN Unit Wireless access point Wired LAN (Network Type → Ad Hoc) USB Wireless LAN Unit PC with built-in wireless LAN function PC with wireless LAN card inserted To enable direct communication (i.e., peer-to-peer) between personal computers and projectors, you need to select the Ad Hoc mode.
7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters, the lens, the cabinet, and to replace the lamp and the filters. ❶ Cleaning the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the filter is dirty or clogged, your projector may overheat. WARNING • Please do not use a spray containing flammable gas to remove dust attached to the filters, etc. Doing so may result in fires.
7. Maintenance 2. Remove the filter unit by pulling out the tab. Filter unit 3. Remove the four filters. Hold and remove the filters fitted to the two sides of the filter unit. 4. Use a vacuum cleaner to vacuum all the dust inside. Get rid of dust in the filter. NOTE: • Whenever you vacuum the filter, use the soft brush attachment to vacuum. This is to avoid damage to the filter. • Do not wash the filter with water. Doing so can result in filter clogging. 5.
7. Maintenance 6. Attach 4 new filters to both sides of the filter unit. Flange The installation locations of the filters are differentiated by whether there are any slits (notches). Install the filter under the flange around the filter unit as follows. Knob (1) Attach the 2 filters with transparent frames fitted to the grips to the side of the filter unit where the knob is located. • Turn over the side of the filter with the transparent box and then install it.
7. Maintenance ❷ Cleaning the Lens • Turn off the projector before cleaning. • The projector has a plastic lens. Use a commercially available plastic lens cleaner. • Do not scratch or mar the lens surface as a plastic lens is easily scratched. • Never use alcohol or glass lens cleaner as doing so will cause damage to the plastic lens surface. WARNING • Please do not use a spray containing flammable gas to remove dust attached to the lens, etc. Doing so may result in fires.
7. Maintenance ❹ Replacing the Lamp and the Filters When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red and the message “THE LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER. USE THE SPECIFIED LAMP FOR SAFETY AND PERFORMANCE.” will appear (*). Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter.
7. Maintenance To replace the lamp: 1. Remove the lamp cover. (1) Loosen the lamp cover screw • The lamp cover screw is not removable. (2) Pull the bottom of the lamp cover towards you and remove it. 2. Remove the lamp housing. (1) Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. • The two screws are not removable. • There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.
7. Maintenance 3. Install a new lamp housing. (1) Insert a new lamp housing until the lamp housing is plugged into the socket. (2) Position so that the guide hole in the bottom right of the lamp house is over the protrusion on the projector then press all the way in. (3) Secure it in place with the two screws. • Be sure to tighten the screws. 4. Reattach the lamp cover. (1) Insert the top edge of the lamp cover into the groove in the projector and close the lamp cover.
7. Maintenance To replace the filters: Four filters are packaged with the replacement lamp. Honeycomb filter (coarse mesh): Large and small sizes (attached to the outside of the filter unit) Accordion filter (fine mesh): Large and small sizes (attached to the inside of the filter unit) NOTE: • Replace all four filters at the same time. • Before replacing the filters, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement.
7. Maintenance 3. Remove the four filters. Hold onto the filters fitted to both sides of the filter unit to remove the filter unit. 4. Remove dust from the filter unit and the filter cover. Clean both outside and inside. 5. Attach 4 new filters to both sides of the filter unit. The installation locations of the filters are differentiated by whether there are any slits (notches). Install the filter under the flange around the filter unit as follows.
8. User Supportware ❶ Operating Environment for Software Included on CD-ROM Names and Features of Bundled Software Programs Name of software program Features Projection Utility • This is a software program used to project your computer’s screen, streaming movie, or sound from the computer over the wired/wireless network. The computer cable (VGA) is not required. (→ page 186) • This software program can be used to control the power ON/OFF and source selection of the projector from your computer.
8. User Supportware Download service For the update information about these software programs, visit our website: URL: http://www.ricoh.com/downloads/ Operating Environment The following is the operating environment for Projection Utility. For the operating environment of other software program, refer to the help function of each software program. [Windows] Supported OS Windows 8/8.1 (Core Edition) Windows 8/8.1 Pro Windows 8/8.
8. User Supportware Network environment Wired or wireless LAN required that supports TCP/IP * The following LAN adapters are verified to work with Projection Utility: • Wired LAN adapter built into Mac • Wireless LAN adapter built into Mac • Apple USB Ethernet adapter • Apple Thunderbolt Ethernet adapter “Easy Connection” supports only wireless LAN.
8. User Supportware ❷ Installing Software Program Installation for Windows software NOTE: • To install or uninstall each software program, the Windows user account must have “Administrator” privilege (Windows 8/8.1, Windows 7, Windows Vista) . • Exit all running programs before installation. If another program is running, the installation may not be completed. 1 Insert the accompanying CD-ROM into your CD-ROM drive. The menu window will be displayed.
8. User Supportware 2 Click a software program you wish to install on the menu window. The installation will start. • Follow the instructions on the installer screens to complete the installation. TIP: Uninstalling a Software Program Preparation: Exit the software program before uninstalling. To uninstall the software program, the Windows user account must have “Administrator” privilege (Windows 8/8.1, Windows 7, and Windows Vista) . • For Windows 8/8.
8. User Supportware Using on Mac OS [Example] Install Projection Utility on the computer. 1. Insert the accompanying CD-ROM in your Mac CD-ROM drive. The CD-ROM icon will be displayed on the desktop. 2. Double-click the CD-ROM icon. The CD-ROM window will be displayed. 3. Double-click the “Mac OS X” folder. 4. Double-click “Projection Utility.pkg”. The installer will start. 5. Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. 6. Read “END USER LICENSE AGREEMENT” and click “Next”.
8. User Supportware ❸ Projecting Your Computer’s Screen Image or Video from the Projector over a LAN (Projection Utility) Using Projection Utility contained on the supplied CD-ROM allows you to send the computer’s screen image to the projector over a wired or wireless LAN. Projection Utility is a program compatible with Windows. Projection Utility for Mac OS is a program compatible with Mac OS.
8. User Supportware Using on Windows Step 1: install Projection Utility on the computer. NOTE: • To install or uninstall the program, the Windows user account must have “Administrator” privilege (Windows 7, Windows Vista). • Exit all running programs before installation. If another program is running, the installation may not be completed. • Projection Utility will be installed to the system drive of your computer.
8. User Supportware Step 2: Connect the projector to a LAN. Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 166) and “9. Controlling the Projector by Using an HTTP Browser” (→ page 42) Step 3: Start Projection Utility. 1. On Windows, click “Start” → “All programs” → “Ricoh Projector UserSupportware” → “Projection Utility” → “Projection Utility”. Projection Utility will start. The select window for network connection will be displayed 2.
8. User Supportware 5. Operate the control window. (7) (1) (2) (3) (4) (5) (6) (1) (Streaming) �Displays the streaming window. Movie files on the PC can be transferred to the projector via the network and played on the projector. Refer to “Movie streaming function” in the help file of Projection Utility. (2) (Source) ���������Selects an input source of the projector. (3) (Picture) ��������Turns on or off AV-MUTE (Picture mute), and turns on or off FREEZE (Freeze a picture).
8. User Supportware TIP: Viewing the “Help” file of Projection Utility • Displaying the Help file of Projection Utility while it is running. Click the [?] (help) icon on the control window. The Help screen will be displayed. • Displaying the Help file of GCT while it is running. Click “Help” → “Help” on the edit window. The Help screen will be displayed. • Displaying the help file using the Start Menu.
8. User Supportware Starting Projection Utility from a USB Memory or SD Card Projection Utility can be started from commercially available removable media such USB memory or SD cards if it is copied beforehand. This will eliminate the trouble of installing Projection Utility to your computer. 1. Copy Projection Utility to removable media. Copy all the folders and files (total size approx.
8. User Supportware Using on Mac OS Step 1: Install Projection Utility for Mac OS on the computer 1. Insert the accompanying CD-ROM in your Mac CD-ROM drive. The CD-ROM icon will be displayed on the desktop. 2. Double-click the CD-ROM icon. The CD-ROM window will be displayed. 3. Double-click the “Mac OS X” folder. 4. Double-click “Projection Utility.dmg” in the “Projection Utility” folder. The “Projection Utility” window will be displayed. 5.
8. User Supportware ❹ Projecting an Image from an Angle (Geometric Correction Tool in Projection Utility) The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle. What you can do with GCT • The GCT feature includes the following three functions • 4-point Correction: You can fit a projected image within the border of the screen easily by align the four corners of an image to the ones of the screen.
8. User Supportware 3. Use the mouse to click the [ • ] mark of which corner you wish to move. The currently selected [ • ] mark will turn red. (In the above example, Windows screens are omitted for clarification.) 4. Drag the selected [ • ] mark to the point you wish to correct and drop it. • When you click somewhere within the project image area, the nearest [ • ] mark will go to the position where the mouse cursor is. 5. Repeat Step 3 and 4 to correct the distortion of the projected image. 6.
8. User Supportware ❺ Projecting Images from the Projector over a LAN (Advanced Network Utility) What you can do with Advanced Network Utility • Using Advanced Network Utility allows you to send the screens of your computers to the projector via wired/wireless LAN. The difference from Projection Utility is that projected images can be sent from a computer to not only one projector but also to two or more projectors at the same time.
8. User Supportware • Projected images can be transferred and saved to computers. When “Meeting Mode” is used, projected images can be sent to the computers of all the participants (attendants) of a “Meeting”. The received images can be saved to your computer with a memo (text data) attached.
8. User Supportware Basic Operation of Advanced Network Utility This section explains the following three cases as examples of operating Advanced Network Utility. (1) Transferring images to the projector (2) Holding a conference (3) Participating in a conference Sending Images to Projector • Connecting projector 1 Turn on the power to the projector for which LAN has been set.
8. User Supportware 4 Check( ) the projector to connect and click [Connect]. If the name of the projector to connect is not on the list or if it is hidden, click [Update]. The screen of your computer will be projected from the projector. At this time, the input signal of the projector will automatically change to “ETHERNET”. • Transferring images When your computer is connected to the projector, the screen of the computer is projected from the projector as is.
8. User Supportware • Stopping or resuming the transmission of images The transmission of the screen of the computer to the projector can be temporarily stopped and then resumed. 1 Click the projector icon ( ) on the Windows taskbar. A pop-up menu will be displayed. 2 Click [Stop Sending]. The projector icon on the taskbar will change ( → ). NOTE: Even if the screen of the computer is changed in this status, the image projected from the projector does not change.
8. User Supportware Holding Conferences • Holding conferences 1 Follow steps 1 through 4 in “Connecting projector” of “Sending Images to Projector” (→ page 197). The screen of your computer will be projected from the projector. • Disclose a file to the participants of the conference. NOTE: To disclose a file to the participants, selection can be made only in folder units. Therefore, a folder only having files that can be disclosed to the participants must be created in advance.
8. User Supportware 5 Select a folder saving the file to be disclosed to the participants, and click [OK]. The file in the selected folder will be displayed in the list of files to transfer. 6 Click [Download]. The file will be shown to the participants. NOTE: When the computer is connected to the projector, the computer screen that is in of being progress is also projected from the projector. To manipulate a screen that should not be shown (not projected), temporarily stop the transmission (→ page 199).
8. User Supportware 3 Click the Meeting Name to participate, and click [Connect]. The computer will be connected to the selected conference and the attendant window will be displayed. If the presenter selects “Send to PC And Projector”, the image projected from the projector is displayed in the attendant window.
8. User Supportware • Saving received images 1 Click [Memo] in the attendant window. A memo pane will be displayed. 2 Click [Save Image] in the attendant window. The image displayed in the attendant window will be saved. • The saved image is added to the memo list and a thumbnail is displayed. • A memo can be attached to the saved image. REFERENCE: • In case of Windows 7/Windows Vista, “Document\Advanced Network Utility\” is the default folder to save a created file.
8. User Supportware • Downloading disclosed file 1 Click [File Transfer] in the attendant window. The “File Transfer” window will be opened. 2 Select a file to download, and click [Download]. Downloading will begin. The progress of the downloading is displayed at the lower left of the window. 3 When downloading is complete, click [File] in the “File Transfer” window, and click [Exit]. The “File Transfer” window will be closed.
8. User Supportware • Changing presenter Three types of settings may be made to change the presenter: “Not Approved”, “Approved”, and “Changing Prohibited” (these can be selected only by the presenter). In the following example, “Not Approved” is selected. • Click [Become A Presenter] in the attendant window. You will change from a participant to a presenter. • Leaving conference Leave the conference and exit Advanced Network Utility. • Click [File] in the attendant window, and click [Exit].
8. User Supportware ❻ JPEG Conversion Tool The JPEG Conversion Tool converts JPEG files not supported by the projector, image files in other formats, PowerPoint files, and other similar files into JPEG files. Installing JPEG Conversion Tool NOTE: • To install or uninstall each software program, the Windows user account must have “Administrator” privilege (Windows 7, Windows Vista) . • Exit all running programs before installation. If another program is running, the installation may not be completed.
8. User Supportware ❼ Managing the Projector Using Projector Management Utility Projector Management Utility conforms to the PJLink class 1 standards, and is compatible with all class 1 commands. A maximum of 100 projectors connected to the network can be managed using one computer. Operating environment Supported OS Windows 8/8.1 (Core Edition) Windows 8/8.1 Pro Windows 8/8.
9. Using the Viewer ❶ What you can do with the Viewer The Viewer feature allows you to view slides or movie files stored on a USB memory on the projector, or a shared folder in a computer connected to the network. The Viewer has the following features. • When a commercially available USB memory that stores image files is inserted into the USB port (Type A) of the projector, the Viewer allows you to view the image files on the USB memory.
9. Using the Viewer NOTE: • Movie files converted by using the video/audio format which is not supported by this projector cannot be played back. In this case, there will be no icon to show that playback is not possible. • Files with Digital Rights Management(DRM) protection cannot be played back. • Some of the movie files that meet the above requirements may not be played back. Movie files may not be played back correctly depending on your network environment or the bit rate of your file.
9. Using the Viewer Notices on shared folder and media server • • Files from a shared folder or media server may not be projected if security or antivirus software is installed on your computer.
9. Using the Viewer ❷ Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar is set to the factory default. Preparation: Before starting the Viewer, store images to the USB memory using your computer. Starting the Viewer 1. Turn on the projector. (→ page 16) 2. Insert the USB memory into the USB port of the projector.
9. Using the Viewer 4. Press the ▶ button to select “USB1” and press the ENTER button. The “USB1” thumbnail screen will be displayed. TIP: • For more information about thumbnail screen, see page 216. 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages. pressing the CTL + ▼ (page down) button will show the next page: pressing the CTL + ▲ (page up) will show the previous page. 6. Press the ENTER button.
9. Using the Viewer • Movie file The movie file will start playing. After finishing the playback, the screen will turn to black. Press the EXIT button to return to the thumbnail screen. • Pressing the ENTER button will display the movie’s control bar with which you can pause or fastforward and some other operations. 7. Remove the USB memory from the projector. Return to the drive list screen. Make sure that the LED on the USB memory is not flashing before removing the USB memory.
9. Using the Viewer Names and functions of Viewer screen The Viewer has three screens: Drive list screen, Thumbnail screen, and Slide screen. Cursor (yellow) Cursor (yellow) Menu Menu Scroll bar Folder icon [Drive list screen] [Thumbnail screen] Path information Drive information/File information Operation button guide Menu guide Control bar * The operation for still image differs from that for movie. [Slide screen] • Drive list screen Displays a list of drives connected to the projector.
9. Using the Viewer Functions Name Description REFRESH Displays additional media servers in the drive list screen. OPTIONS Opens the OPTIONS menu. SLIDE SETTING Sets up slides. (→ page 219) MOVIE SETTING Sets up movie files. (→ page 220) AUTO PLAY SETTING Sets up auto play. (→ page 220) SHAREED FOLDER Sets up a shared folder. (→ page 222) MEDIA SERVER Sets up a media server. (→ page 226) RETURN Closes the OPTIONS menu. SYSTEM SETTING Switches to the system setting menu.
9. Using the Viewer • Thumbnail screen Displays a list of folders, thumbnails, and icons in the drive selected on the drive list screen. Menu operation • Use the ▼ or ▲ button to move the cursor up or down. Select the menu item and press the ENTER button to display the menu or setting screen. Operation for Thumbnail screen 1. Press the ▶ button to move the cursor to the thumbnail screen when the OPTIONS menu is not displayed. 2. Press the ▼, ▲, ◀, or ▶ button to select a file or folder. 3.
9. Using the Viewer • Slide screen (still image/movie) Plays a file selected from a list of thumbnails or icons. Control bar operation • The control bar will be displayed only when a still image (or index file) and a movie file is selected. • The control bar for still images differs from that for movie files. 1. Pressing the ENTER button in Slide screen will display the control bar at the bottom of the screen. 2. Use the ◀ or ▶ button to select a file and press the ENTER button.
9. Using the Viewer Functions of movie control bar Name Description PREV Goes back to the beginning of a movie file. • Goes back to the beginning of the previous movie file if executed immediately after being started playing. FR Fast-rewinds a movie file for about 7 seconds. PLAY/PAUSE PLAY Plays a movie file. PAUSE Stops playing a movie file. FF Fast-forwards a movie file for about 7 seconds. NEXT Goes to the beginning of a next movie file.
9. Using the Viewer Viewer option settings • SLIDE SETTING Sets still images or slides. Name Options Description SCREEN SIZE BEST FIT Displays the image with its aspect ratio in the projector’s displayable maximum resolution. ACTUAL SIZE Displays the image in its actual size. MANUAL Selects manual play. AUTO Selects auto play. INTERVAL 5 - 300 seconds Specifies interval time when [AUTO] is selected for PLAY MODE. REPEAT Check mark Turns on or off the repeat function.
9. Using the Viewer • MOVIE SETTING Sets the functions for a movie file. Name Options Description SCREEN SIZE BEST FIT Displays the image with its aspect ratio in the projector’s displayable maximum resolution. ACTUAL SIZE Displays the image in its actual size. OFF Turns on or off the repeat function. ONE REPEAT Repeats one file only. ALL REPEAT Repeats all files in the current folder. REPEAT TIP • Turning on [REPEAT] will display black screen during intermission between movies.
9. Using the Viewer • SORT SETTING Sets the order of displaying thumbnails or slides. Name Options Description SORT NAME (ABC..) Displays the files alphabetically by name in ascending order. NAME (ZYX..) Displays the files alphabetically by name in descending order. EXT. (ABC..) Displays the files alphabetically by extension in ascending order. EXT. (ZYX..) Displays the files alphabetically by extension in descending order. DATE (NEW) Displays the files in reverse chronological order.
9. Using the Viewer ❸ Projecting data from shared folder LAN Shared folder Wireless LAN Projector Shared folder Preparation For projector: Connect the projector to the network. For computer: Place files to be projected in a shared folder and note the folder’s path. Memorize or write down the path for later use. • For sharing a folder, refer to your user guide or help file accompanied with your Windows computer. • Use a keyboard to give a name to the shared folder in alphanumeric characters.
9. Using the Viewer • When the OPTIONS menu is displayed, the drive list will not be displayed. 3. Display the [SHARED FOLDER] screen. Press the ▼ button to select the (SHARED FOLDER) icon and press the ENETR button. 4. Select a folder number and place to enable it. Press the ◀ or ▶ button to a shared folder number and press the ▼ button to select [ENABLE] , and then press the ENTER button. 5. Enter the path, user name, and password for the shared folder.
9. Using the Viewer 6. Exit the setting. Press the ▼ button to select [OK] and press the ENTER button. This will close the [SHARED FOLDER] screen. • If an error message appear, your settings are not correct. Try again.
9. Using the Viewer Disconnecting the shared folder from the projector • Disable the number of a shared folder you wish to disconnect Press the ▼ button to select [ENABLE] and press the ENTER button to clear it. TIP: • Connecting settings for Shared folder Settings of up to four folders can be saved. Restarting the projector will display setting-saved shared folders in grey folder icon on the drive list screen. Selecting the grey icon folder will skip entry for a folder path.
9. Using the Viewer ❹ Projecting data from media server Media server LAN Wireless LAN Media server Projector Media server Preparation For projector: Connect the projector to the network. For computer: Prepare image files or movie files to be projected, and set up “Media Sharing” in Windows Media Player 11 or Windows Media Player 12. NOTE: • Both the projector and the media server must be on the same subnet. Connecting to the media server beyond the subnet is not possible.
9. Using the Viewer 3. Select “Share my media” check box, and then select OK. A list of accessible devices will be displayed. 4. Select “WU6181N Series” and then “Allow”. A check mark will be added to the “WU6181N Series” icon. • The “WU6181N Series” is a projector name specified in [NETWORK SETTINGS]. 5. Select “OK”. This will make pictures and video in “Library” available from the projector.
9. Using the Viewer Setting up “Media Sharing” in Windows Media Player 12 1. Start Windows Media Player 12. 2. Select “Stream”, and then select “Automatically allow devices to play my media”. The “Allow All Media Devices” windows will be displayed. 3. Select “Automatically allow all computers and media devices”. Graphics and movie files in “Library” can be used from the projector.
9. Using the Viewer Connecting the projector to the media server Press the 9/USB-A button on the remote control. The VIEWER will start. • When operating with the main body, use the “INPUT” button to select [9:USB-A]. • This will start searching for a computer with “media sharing” enabled in the network and add it to the “Media server” of the thumbnail screen. Another way to do this is to point the cursor to “Media server” and select [REFRESH] from the thumbnail menu and press the ENTER button.
9. Using the Viewer Disconnecting the projector from the media server 1. Display the OPTIONS menu. Press the ▼ button to select the [OPTIONS] icon and select the ENTER button. 2. Display the MEDIA SERVER setting screen. Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button. 3. Disable the connection. Press the ENTER button to clear the checkmark to disable the connection. Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting screen.
10. Appendix ❶ Throw distance and screen size Six separate bayonet style lenses can be used on this projector. Refer to the information on this page and use a lens suited for the installation environment (screen size and throw distance). For instructions on mounting the lens, see page 153. Lens types and throw distance WUXGA Type Screen size Replacement Lens Type1 30" 40" 60" 80" 100" 120" 150" 200" 240" 300" 400" 500" 0.7 1.0 1.4 1.7 2.1 2.6 Replacement Lens Type8 1.0 - 1.3 1.4 - 1.8 1.7 - 2.2 2.0 - 2.
10. Appendix WXGA Type Screen size Replacement Lens Type1 30" 40" 60" 80" 100" 120" 150" 200" 240" 300" 400" 500" 0.7 1.0 1.4 1.7 2.1 2.6 Replacement Lens Type8 1.0 - 1.3 1.4 - 1.8 1.7 - 2.2 2.0 - 2.7 2.6 - 3.4 3.4 - 4.5 4.1 - 5.4 5.2 - 6.8 6.9 - 9.0 8.7 - 11.3 Lens model name Replacement Lens Standard Lens Type1 Replacement Lens Type2 Type3 0.7 - 1.0 1.0 - 1.3 1.2 - 2.5 1.5 - 2.0 1.9 - 3.8 3.7 - 6.0 2.0 - 2.6 2.5 - 5.1 5.0 - 8.1 2.5 - 3.3 3.2 - 6.4 6.3 - 10.1 3.0 - 4.0 3.9 - 7.7 7.6 - 12.2 3.8 - 5.0 4.
10. Appendix Ex.: Throw distance when projecting on a 150" screen with the XGA Type using the Standard Lens Type1: According to the “Screen Size (for reference)” table (→ page 234), H (screen width) = 304.8 cm. The throw distance is 304.8 cm × 1.5 to 304.8 cm × 3.0 = 457.2 cm to 914.4 cm (because of the zoom lens). Projection range for the different lenses WUXGA Type: 0.7–2.6 m WXGA Type: 0.7–2.6 m XGA Type: 0.6–2.5 m Replacement Lens Type1 Replacement Lens Type8 WUXGA Type: 1.0–11.3 m WXGA Type: 1.
10. Appendix Tables of screen sizes and dimensions WUXGA Type/WXGA Type Size (inches) Screen height 16:10 screen size (diagonal) Screen width 30 40 60 80 100 120 150 200 240 300 400 500 Screen width (inches) (cm) 25.4 64.6 33.9 86.2 50.9 129.2 67.8 172.3 84.8 215.4 101.8 258.5 127.2 323.1 169.6 430.8 203.5 516.9 254.4 646.2 339.2 861.6 424.0 1077.0 Screen height (inches) (cm) 15.9 40.4 21.2 53.8 31.8 80.8 42.4 107.7 53.0 134.6 63.6 161.5 79.5 201.9 106.0 269.2 127.2 323.1 159.0 403.9 212.0 538.5 265.
10. Appendix Lens shifting range This projector is equipped with a lens shift function for adjusting the position of the projected image by turning the lens shift dials. The lens can be shifted within the range shown below. NOTE: • The lens shift function cannot be used when using the Replacement Lens Type1 lens. • Please do not use the lens shift function when projecting portrait images. Please use it with the lens in the center.
10.
10.
10.
10.
10. Appendix ❸ Specifications Model name Method Specifications of main parts Liquid crystal panel Size RICOH PJ WU6181N/WX6181N/X6181N Three primary color liquid crystal shutter projection method X6181N: 0.79" (with MLA) × 3 (aspect ratio: 4:3) WX6181N: 0.76" (with MLA) × 3 (aspect ratio: 16:10) WU6181N: 0.
10. Appendix Model name DisplayPort BNC (CV) BNC (Y/C) Video input Audio input Video input Audio input Video input Audio input PC control connector USB port USB port for wireless LAN Ethernet port Remote connector 3D SYNC output terminal Usage environment Power supply Power consumption Eco mode off Eco mode on STANDBY (NORAML) STANDBY (NETWORK STANDBY) Rated input current External dimensions Weight RICOH PJ WU6181N/WX6181N/X6181N DisplayPort × 1 Data rate: 2.7Gbps/1.62Gbps No.
10. Appendix ❹ Cabinet Dimensions 359 (14.1) 368 (14.5) Unit: mm (inch) 499(19.6) 162 (6.4) 142 (5.6) Lens center Lens center 200 (7.9) 78.5 (3.1) 250(9.
10. Appendix ❺ Pin assignments and signal names of main connectors COMPUTER IN/ Component Input Connector (Mini D-Sub 15 Pin) Connection and signal level of each pin 6 11 12 13 14 15 7 8 9 10 1 2 3 4 5 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No.
10. Appendix Ethernet Port (RJ-45) 1 2 3 4 5 6 7 8 Pin No. 1 2 3 4 5 6 7 8 TxD+ TxD− RxD+ Disconnection Disconnection RxD− Disconnection Disconnection Signal Pin No. 1 2 3 4 VBUS D− D+ Grounding Pin No.
10. Appendix ❻ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator display Off Flashing Blue (short flashes) Blue (long flashes) Orange (short flashes) Orange (long flashes) Blue Red Orange Lit Projector status Power is off.
10. Appendix Lamp Indicator Indicator display Off Flashing Lit Projector status Procedure The lamp is turned off. – Green Preparing to relight lamp after lighting has failed Wait a while. Red Lamp replacement grace period The lamp has reached the end of its service life and is now in the replacement grace period (100 hours). Replace the lamp as soon as possible. (→ page 176) Red (cycles of 6) Lamp does not light The lamp has not turned on. Wait at least 1 minute, then turn the power back on.
10. Appendix Common Problems & Solutions (→ “Power/Status/Lamp Indicator” on page 245.) Problem Check These Items Does not turn on or shut down • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on. (→ pages 15, 16) • Ensure that the lamp cover is installed correctly. (→ page 177) • Check to see if the projector has overheated.
10. Appendix Problem Check These Items Remote control does not work • Install new batteries. (→ page 12) • Make sure there are no obstacles between you and the projector. • Stand within 40 m/1575 inch of the projector. (→ page 13) Indicator is lit or blinking • See the POWER/STATUS/LAMP Indicator. (→ page 245) Cross color in RGB mode • Press the AUTO ADJ. button on the projector cabinet or the remote control.
10. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information.
10.
© 2015 Ricoh Co., Ltd.
RICOH PJ WU6181N /WX6181N /X6181N User’s Manual Printed in China Y076-6220A GB EN US EN
