Operation Manual

93
5. Using On-Screen Menu
Selecting the Aspect Ratio [ASPECT RATIO]
Use this function to select the screen’s vertical:horizontal aspect ratio.
Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio. (→ page 112)
The projector automatically identifies the signal being input and sets the optimum aspect ratio.
For Computer signal
For Component/Video/S-Video signals
When the screen type is set to 4:3 When the screen type is set to 16:9 or 16:10
Resolution Aspect Ratio
VGA 640 × 480 4:3
SVGA 800 × 600 4:3
XGA 1024 × 768 4:3
WXGA 1280 × 768 15:9
WXGA 1280 × 800 16:10
HD(FWXGA) 1366 × 768 approx. 16:9
WXGA+ 1440 × 900 16:10
SXGA 1280 × 1024 5:4
SXGA+ 1400 × 1050 4:3
WXGA++ 1600 × 900 16:9
UXGA 1600 × 1200 4:3
WSXGA+ 1680 × 1050 16:10
FHD(1080P) 1920 × 1080 16:9
WUXGA 1920 × 1200 16:10
WQXGA 2560 × 1600 16:10
Options Function
AUTO The projector will automatically determine the incoming signal and display it in its aspect ratio.
The projector may erroneously determine the aspect ratio depending on its signal. If this occurs, select the appropri-
ate aspect ratio from the following.
4:3 The image is displayed in 4:3 aspect ratio.
5:4 The image is displayed in 5:4 aspect ratio
16:9 The image is displayed in 16:9 aspect ratio
15:9 The image is displayed in 15:9 aspect ratio