Operation Manual

113
5. Using On-Screen Menu
PROGRAM TIMER
This option turns on/standby the projector and changes video signals, and selects ECO mode automatically at a specified time.
NOTE:
• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 115)
Make sure that the projector is in the standby condition with the POWER cord connected.
The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned o. If the main power is not supplied to the projector
for two weeks or more, the built-in clock stops working.
Setting a new program timer
1. On the PROGRAM TIMER screen, use the ▲ or ▼ button to select [SETTINGS] and press the ENTER button.
The [PROGRAM LIST] screen will be displayed.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required.
ACTIVE ............................. Place a check mark to enable the program.
DAY .................................... Select days of the week for the program timer. To execute the program from Monday to Friday, select
[MON-FRI]. To execute the program in everyday basis, select [EVERYDAY].
TIME .................................. Set the time to execute the program. Enter time in 24-hour format.