Operation Manual

114
5. Using On-Screen Menu
FUNCTION ..................... Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector by setting
[ADVANCED SETTINGS]. Selecting [INPUT] will allow you to select a video source by setting [ADVANCED
SETTINGS]. Selecting [ECO MODE] will allow you to select [ECO MODE] by setting [ADVANCED SETTINGS].
ADVANCED SETTINGS
.............................................Select power on/off, a type of video source, or ECO MODE for the selected item in [FUNCTION].
REPEAT ............................ Place a check mark to repeat the program continuing basis. To use the program this week only, clear the
check mark.
4. Select [OK] and press the ENTER button.
This will complete the settings.
You will be returned to the [PROGRAM LIST] screen.
5. Select [BACK] and press the ENTER button.
You will be returned to the [PROGRAM TIMER] screen.
6. Press the EXIT button.
You will be returned to the [TOOLS] screen.
NOTE:
• Up to 30 dierent timer settings can be programmed.
• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.
• The Program Timer is executed on a set time basis, not in a program basis.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be cleared automatically and the program
will be disabled.
• When the on-time and the o-time set for the same time, the o-time setting will take preference.
• Two dierent sources are set for the same time, the larger program number will take preference.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the o-time setting is expired under the condition in which the power o is not possible, the o-timer setting will not be executed until the power o becomes
possible.
• Programs not marked with a check mark in [ACTIVE] of the [EDIT] screen will not be executed even if the Program Timer is enabled.
• When the projector is turned on by using the program timer and if you want to turn o the projector, set the o-time or do it manually so as not to leave the projector
on for a long period of time.