Operation Manual
138
5. Using On-Screen Menu
NETWORK SETTINGS(MM)
Important:
• Consult with your network administrator about these settings.
• When using a wired LAN, connect the LAN cable (Ethernet cable) to the Ethernet port (LAN) of the projector. (→ page 166)
• When using a wireless LAN, attach the wireless LAN unit sold separately to the projector. (→ page 167)
TIP: The [NETWORK SETTINGS(MM)] you make will not be aected even when [RESET] is done from the menu.
About the Projector's [NETWORK SETTING].(→ page 6)
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Select [WIRED LAN] or [WIRELESS LAN] → [PROFILES] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for wired or wireless LAN.
Next turn on or off for [DHCP], [IP ADDRESS], [SUBNET MASK], and [GATEWAY] and select [OK] and press the ENTER button.
(→ page 140)
To recall LAN settings stored in the profile number:
Select [PROFILE 1] or [PROFILE 2] for wired or wireless LAN, and then select [OK] and press the ENTER button. (→ page 139)
To connect a DHCP server:
Turn on [DHCP] for wired or wireless LAN. Select [ON] and press the ENTER button. To specify IP address without using the
DHCP server, turn off [DHCP]. (→ page 140)
To set only for wireless LAN (NETWORK TYPE and WEP/WPA):
Select [PROFILE 1] or [PROFILE 2] for wireless LAN, and then select [ADVANCED] and [OK] and press the ENTER button. The
Advanced menu will be displayed. (→ page 141)
To select an SSID:
Select [ADVANCED] → [SITE SURVEY] and press the ENTER button.
Select an SSID and press the > button to select [OK] and press the ENTER button.
If you do not use [SITE SURVEY], type the SSID and select [INFRASTRUCTURE] or [AD HOC]. (→ page 141)
To execute [EASY CONNECTION] using Advanced Network Utility:
The [EASY CONNECTION] is a mode that can abbreviate the troublesome LAN settings when using the Advanced Network Utility
and connecting the PC and projector via a wireless LAN.
The Projection Utility and
Advanced Network Utility are contained on the supplied CD-ROM.
To use [EASY CONNECTION], select [WIRELESS LAN] → [PROFILES] → [EASY CONNECTION].
NOTE: The [EASY CONNECTION] function is available on Windows 7, Windows Vista.