Operation Manual

156
6. Installation and Connections
Digital RGB signal connection
• Connect a commercially available HDMI cable between the computer’s HDMI output connector and the projector’s HDMI1 or
HDMI2 input connector.
• Connect a commercially available DisplayPort cable between the computer’s DisplayPort output connector and the projector’s
DisplayPort input connector.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
INPUT button on the projector
cabinet
Button on the remote control
HDMI 1 IN
1:HDMI 1 1/HDMI 1
HDMI 2 IN
2:HDMI 2 2/HDMI 2
DisplayPort IN
3:DisplayPort 3/DisplayPort
Disp layPort IN
HDMI 1 IN
HDMI 2 IN
HDMI cable (not supplied)
DisplayPort cable (not supplied)