Operation Manual

161
6. Installation and Connections
Connecting Component Input
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
INPUT button on the projector
cabinet
Button on the remote control
COMPUTER IN
7:COMPUTER 7/COMPUTER
BNC IN
4:BNC 4/BNC
NOTE:
• When the signal format is set to [AUTO] (default factory setting when shipped), the computer signal and component signal are automatically distinguished and switched.
If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] → [VIDEO] → [SIGNAL TYPE] in the on-screen menu of the projector.
• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).
AUDIO IN
CO MPUTER IN
AUDIO IN
15-pin - to - RCA (female) × 3 cable
adapter (ADP-CV1E)
BNC (male) - to - RCA (male) conversion cable × 3 (sold
commercially)
Stereo mini plug - to - RCA audio cable (not sup-
plied)
Component video RCA × 3 cable (not
supplied)
Blu-ray player Audio Equipment