Operation Manual

1. Introduction

About the Projector’s [NETWORK SETTINGS]

“NETWORK SETTINGS” need to be carried out when connecting this projector to a wired or wireless LAN.

The following two types of [NETWORK SETTINGS] 1 and 2 can be used. Use the [NETWORK SETTINGS] 1 and 2 for different pur-

poses depending on the software and function described in the table below.

1. “NETWORK SETTINGS” under [SETUP] in the on-screen menu (→ Page 120)

Or “NETWORK SETTINGS” in the HTTP server (→ Page 46)

2. “NETWORK SETTINGS ” in the application menu (→ Page 138)

Or “NETWORK SETTINGS” in the HTTP server (→ Page 49)

1. NETWORK SETTINGS 2. NETWORK SETTINGS (MM)

Wired LAN OK OK

Wireless LAN Not OK OK*

Main uses Projector control Transmission of images

Function • PC control

• PJLink

• AMX BEACON

• CRESTRON

• ALERT MAIL

• HTTP server (PROJECTOR ADJUSTMENT)

• Synchronize with an Internet time server

• Shared folder (viewer)

• Media Server (viewer)

• Network Projector

User Supportware • Projector Management Utility • Projection Utility

• Advanced Network Utility

* A wireless LAN unit sold separately is required to connect the projector to a wireless LAN.