Operation Manual

196
8. User Supportware
• Projected images can be transferred and saved to computers.
When “Meeting Mode” is used, projected images can be sent to the computers of all the participants (attendants) of a “Meet-
ing”. The received images can be saved to your computer with a memo (text data) attached.
Presenter
Attendant
Attendant
Attendant
• 1-click switching of presenter
When switching to another presenter during the conference, the participants (attendants) can simply click a button to switch
over to the new presenter.
• Central management of the projecting computer
Using the Training Mode allows you to use a single computer (Manager) to manage which computer (Attendant) projects.
Possible operation includes switching projecting computers to project from, as well as temporarily terminating communication
with the projector.
Attendant D (presenter)
Manager
Attendant B Attendant C
Mr. D, please start
your presentation.
Attendant A
NOTE:
The Training Mode is not installed via the “Typical” installation option when Advanced Network Utility is installed.
To use Training Mode, select “Extension” installation option on the install selection screen that is displayed while Advanced Network Utility installation is in progress, and
select “Training Mode (Attendant)” or “Training Mode (Manager)”.
Connecting the projector to a LAN
Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 166), “Connecting to a
Wireless LAN” (→ page 167) and “9 Application Menus” (→ page 136)