Operation Manual

235
10. Appendix
Lens shifting range
This projector is equipped with a lens shift function for adjusting the position of the projected image by turning the lens shift
dials. The lens can be shifted within the range shown below.
NOTE:
• The lens shift function cannot be used when using the Replacement Lens Type1 lens.
• Please do not use the lens shift function when projecting portrait images. Please use it with the lens in the center.
* Refer to the lens shift table on the next page for the drawing number of the lens shift range.
Desk/front projection
100%V
100%H
1
2
3
4
10%H 10%H
Width of projected image
Height of projected image
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
Ceiling/front projector
100%V
100%H
10%H
10%H
1
2
3
4
Height of projected image
Width of projected image