Operation Manual

16
2. Projecting an Image (Basic Operation)
Standby Blinking Power On
Steady red light Blinking blue
light
Steady blue
light
❸ Turning on the Projector
1. Remove the lens cap.
2. Press the
(POWER) button on the projector cabinet or the
POWER ON button on the remote control.
The POWER indicator will light up in blue from red and then start
blinking. After that, the image will be projected onto the screen.
TIP:
• When the message “PROJECTOR IS LOCKED! ENTER YOUR PASSWORD.” is displayed,
it means that the [SECURITY] feature is turned on. (→ page 36)
• When the ECO message is displayed, it means that [ON] is selected for [ECO MES-
SAGE]. (→ page 108)
• Pressing buttons such as power button and MENU button will make sound. To
turn o the beep sound, select [OFF] for [BEEP] from the menu. (→ page 119)
After you turn on your projector, ensure that the computer or
video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal is being input (by
factory default menu settings).
Eternet
(→ page 245)