Operation Manual

2. Projecting an Image (Basic Operation)

❹ Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.

Detecting the Signal Automatically

Press the INPUT button for 1 second or longer. The projector will search for the

available input source and display it. The input source will change as follows:

Automatically checks for any input signal in the order HDMI 1 → HDMI 2 →

Display Port → BNC → BNC(CV) → BNC(Y/C) → COMPUTER → USB-A. The

input signal will be projected when it is detected.

• Press it briefly to display the [INPUT] screen.

Press the ▼/▲ buttons to match the target input terminal and then press the

ENTER button to switch the input. To delete the menu display in the [INPUT]

screen, press the MENU or EXIT button.

TIP: If no input signal is present, the input will be skipped.

Eternet

Using the Remote Control

Press any one of the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/BNC(CV), 6/

BNC(Y/C), 7/Computer, 8/Ethernet, or 9/USB-A buttons.

Eternet