Operation Manual

45
3. Convenient Features
PICTURE: Controls the video adjustment of the projector.
BRIGHTNESS ▲ Increases the brightness adjustment value.
BRIGHTNESS ▼ Decreases the brightness adjustment value.
CONTRAST ▲ Increases the contrast adjustment value.
CONTRAST ▼ Decreases the contrast adjustment value.
COLOR ▲ Increases the color adjustment value.
COLOR ▼ Decreases the color adjustment value.
HUE ▲ Increases the hue adjustment value.
HUE ▼ Decreases the hue adjustment value.
SHARPNESS ▲ Increases the sharpness adjustment value.
SHARPNESS ▼ Decreases the sharpness adjustment value.
• The functions that can be controlled will vary depending on the signal being input to the projector. (→ page 89, 90)
SOURCE SELECT: This switches the input connector of the projector.
HDMI1 Switches to the HDMI 1 IN connector.
HDMI2 Switches to the HDMI 2 IN connector.
DisplayPort Switches to the DisplayPort.
BNC Switch to BNC (analog RGB) video input.
BNC(CV) Switch to BNC (CV) video input.
BNC(Y/C) Switch to BNC (Y/C) video input.
COMPUTER Switches to the COMPUTER IN connector.
ETHERNET Switch to the data display that is sent from the network.
USB-A Switch to the data display of the USB memory that has been set up in the projector.
PROJECTOR STATUS: This displays the condition of the projector.
LAMP LIFE REMAINING Displays the remaining life of the lamp as a percentage.
LAMP HOURS USED Displays how many hours the lamp has been used.
FILTER HOURS USED Displays how many hours the filter has been used.
ERROR STATUS Displays the status of errors occurring within the projector.
LOG OFF: Logging off your projector and returning to the authentication screen (LOGON screen).