Operation Manual
50
3. Convenient Features
SITE SURVEY Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
NETWORK TYPE Select communication method when using wireless LAN.
INFRASTRUCTURE: Select this option when communicating with one or more equipment con-
nected to the wireless LAN network via a wireless access point.
AD HOC: Select this option when using the wireless LAN to directly communicate with a com-
puter in peer-to-peer mode.
SECURITY TYPE Turn on or off the encryption mode for secure transmission. When turn on the encryption mode,
set WEP key or encrypted key.
DISABLE Will not turn on the encryption feature. Your communications may be
monitored by someone.
WEP 64 bit Uses 64-bit datalength for secure transmission.
WEP 128 bit Uses 128-bit datalength for secure transmission. This option will increase
privacy and security when compared to use of 64-bit datalength encryption.
WPA-PSK TKIP / WPA-PSK AES/
WPA2-PSK TKIP / WPA2-PSK AES/
WPA-EAP TKIP EAP-TLS/
WPA-EAP AES EAP-TLS/
WPA-EAP TKIP PEAP-MSCHAP v2/
WPA-EAP AES PEAP-MSCHAP v2/
WPA2-EAP TKIP EAP-TLS/
WPA2-EAP AES EAP-TLS/
WPA2-EAP TKIP PEAP-MSCHAP v2/
WPA2-EAP AES PEAP-MSCHAP v2
These options parovide stronger security
than WEP.
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in your wireless network.
• When you use WEP, your image transmission speed will slow down.
• Other encryption keys than WEP 64bit and WEP 128bit are not available when [AD HOC] is selected from [NETWORK TYPE].
• To install a digital certicate, use the projector’s menu. (→ page 143)
INDEX Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE].
KEY When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]:
Enter WEP key.
Select Characters (ASCII) Hexadecimal digit (HEX)
WEP 64 bit Up to 5 characters Up to 10 characters
WEP 128 bit Up to 13 characters Up to 26 characters
When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2 PSK-AES]:
Enter encryption key. Key length must be 8 or greater and 63 or less.
USERNAME Set a user name for WPA-EAP/WPA2-EAP.
PASSWORD Set a password for WPA-EAP TKIP PEAP-MSCHAP v2/WPA-EAP AES PEAP-MSCHAP v2/WPA2-
EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.
USE DIGITAL CERTIFICATE Select this if you use a digital certificate for WPA-EAP TKIP PEAP-MSCHAP v2/WPA-EAP AES
PEAP-MSCHAP v2/WPA2-EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.
• NAME
HOST NAME Enter the hostname of the network connected to the projector. A host name must be 15 or less.