Operation Manual

30
The LED status indicators are located on the rear of the projector. Each LED is
dened below.
LED Type LED Status Projector State
Light LED
Off Laser diode is off
Solid Orange Laser diode time has expired
Solid Green Laser diode is on and operating correctly
Flashing Red When projector has lost over 60% initial luminance
Status LED
Off AC power is off (without AC plug in)
Off
AC has been applied, projector is in standby mode
NOTE: Status LED cannot be ashing red, as this is
reserved for an error condition. Status LED is off but
keypad LED will indicate Standby Mode.
Solid Green Projector is powered up and operating normally
Flashing Green Projector communications
Flashing Orange Projector is in cool down mode or startup mode
Flashing
(alternating) Green/
Orange
Projector is in ash update state
Solid Red Over-temperature
Flashing Red Fan failure
AV Mute
Solid Green Light is on - image is displayed
Solid Orange Light is on - image is blank
LED Status Indicators