Operation Manual
40
Turn the Projector On
1. Ensure that the power cord and signal cable are securely connected. The
Power button on the built in keypad is illuminated.
2. Turn on the projector by pressing “ ” on the remote control or press “ ” on
the built-in keypad. The Status LED is Orange with a long blink.
2
3. Turn on the source. Press the Input key on the remote control to select an input
source (VGA, HDMI, or Component).
3
4. The projector detects the source you selected and displays the image.
NOTE:
The rst time the projector is used, the preferred language may be selected from the main menu after the startup screen is
displayed.
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto
Input
Menu Exit
Hot Key
AV Mute
Pattern
Focus
Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
2
Power on
3
Input Key