Operation Manual
56
• Manual Adjustment
1. Adjust color slide bars and judge image color by eye or meter. A user-
dened color “adjustment” can be applied.
2. Use this submenu if you do not have specic color coordinates in mind and
will judge color performance by eye or meter. As for Meter Adjustment, each
color control actually denes new x/y coordinates for that color and changes
its hue. The main colors (red part of red, green part of green and blue part
of blue) adjust the intensity of that color component, while the modifying
colors (e.g. green part of red and blue part of red) modify the x and y value
and change the hue of that color. At the same time the main colors also are
used to control the color of the white point.
Advanced
• White Peaking: (Video source only) Increase the brightness of whites that are
near 100%.
• Gamma: Select the appropriate gamma from Video, Film, Bright, CRT, DICOM,
and Gamma 2.2.
• Color Temperature: Change the intensity of the colors. Select a listed relative
warmth value.
• Color Space: Select a color space that has been specically tuned for the input
signal. Use only for analog signals and certain digital sources.
• Color Settings: Adjust the gain of the red, green, or blue channel of the image.
It will affect the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect the
black and white.
Reset RGB gain/offset to return the factory default settings for color adjust-
ments.
• Color Enhancement: Apply the Color enhancement process.
Measured Data
Target Data